Cisco Systems ONS 15540 installation instructions Splitter Based Lcmb

Page 24

Chapter 2 Quick Installation Procedures

Installing Cisco ONS 15540 ESPx Hardware

of the right of the cable storage drawer, enter the cross connect drawers through the right side, and connect to their destination connector. The breakout cables are color coded and should be matched to their corresponding colors on the cross connect panel inside the drawer.

The cabling route inside the drawers is suggested cabling only. Use your own judgement as to how to best route your cable in the drawer according to your configuration and cable length.

Figure 2-4shows connections at the cross connect drawer for a configuration with two 8-channel splitter-based line card motherboards.

Figure 2-4 Cross Connect Drawer on the Cisco ONS 15540 ESPx with 8-Channel Splitter-Based Line Card Motherboard

-

Splitter Based LCMB 1

4 TSP ITU

 

4 TSP ITU

Wavelengths

 

Wavelengths

from

 

from

LCMB 1W

 

LCMB 1E

Splitter Based LCMB 2

4 TSP ITU

 

4 TSP ITU

Wavelengths

 

Wavelengths

from

 

from

LCMB 2W

 

LCMB 2E

To West

To East

To West

To East

Mux/Demux

Mux/Demux

Mux/Demux

Mux/Demux

85349

Optical Transport Turn-Up and Test Guide

2-24

78-14964-01

 

 

Image 24
Contents Quick Installation Procedures Preparing to Install the ChassisInstalling the Chassis Installing the Processor CardInstalling Strain Relief Brackets LED Installing a Redundant Processor Card Connecting the Console PortInstalling Mux/Demux Motherboards and Mux/Demux Modules Installing Mux/Demux MotherboardsInstalling Line Card Motherboards and Transponder Modules Installing 4-Channel or 8-Channel Mux/Demux ModulesInstalling 16-Channel Mux/Demux Modules Installing Line Card Motherboards Installing SM Transponder Modules or MM Transponder Modules Installing Extended Range Transponder ModulesCabling Transponder Modules Cabling Mux/Demux ModulesConnecting Mux/Demux Module and OSC Ports Connecting 4-Channel or 8-Channel Mux/Demux ModulesPreparing to Install the Chassis Installing Cross Connect Drawers Installing the Adapters in the Cross Connect DrawersInstalling the Vertical Cable Guides NME1Installing the Redundant Processor Card Installing Mux/Demux Motherboards and Mux/Demux Modules Installing 32-Channel Mux/Demux Modules Installing Line Card Motherboards and Transponder Modules Installing SM Transponder Modules or MM Transponder Modules 10 Extended Range Transponder Module LEDs Cabling Mux/Demux Modules Cabling Directly with Cable Storage Drawers Opening the Cable Storage DrawerPull out the cable storage drawer -2 on Locking the Drawer Splitter Based Lcmb Non- Splitter Based Lcmb 6shows the cross connect drawer on the Cisco ONS 15540 ESPx Shelf Grounding Procedure Connecting Mux/Demux Modules and Transponder ModulesCleaning the Shelf Cleaning Optical ConnectorsPowering Up the Chassis Verifying Installation of Hardware Verifying the Power UpMA-MDXA-08D0

ONS 15540 specifications

Cisco Systems ONS 15540 is a high-capacity Optical Network System that plays a vital role in modern telecommunications by providing scalable and reliable transport solutions for service providers. Designed to accommodate the rapidly increasing demand for bandwidth, the ONS 15540 allows for seamless integration of voice, video, and data services over a single network infrastructure.

One of the standout features of the ONS 15540 is its ability to support both SONET (Synchronous Optical Network) and SDH (Synchronous Digital Hierarchy) protocols, enabling interoperability between different equipment and networks. This compatibility makes it an attractive solution for carriers looking to optimize their existing infrastructure while also preparing for future growth. The system is capable of delivering line rates of up to 40 Gbps, making it suitable for high-traffic environments.

The ONS 15540 employs advanced wavelength division multiplexing (WDM) technology, which allows multiple data streams to be transmitted simultaneously over a single optical fiber. This capability maximizes the utilization of existing fiber resources and significantly increases bandwidth availability. The system supports both CWDM (Coarse Wavelength Division Multiplexing) and DWDM (Dense Wavelength Division Multiplexing) configurations, offering flexibility to meet diverse network needs.

Another significant characteristic of the ONS 15540 is its modular architecture. This design enables service providers to easily upgrade and expand their systems by adding new line cards or service modules without significant disruption. The ONS 15540 accommodates various types of interfaces, including Ethernet, TDM, and video, ensuring the system can support a wide range of applications.

In addition to its hardware features, the ONS 15540 includes sophisticated management capabilities through Cisco's comprehensive management tools. These tools allow network operators to monitor performance, provision new services, and perform troubleshooting efficiently. With built-in redundancy and fault-tolerant features, the system ensures high availability and reliability, critical for service providers that require 24/7 operation.

In summary, the Cisco Systems ONS 15540 optical networking system provides a robust solution for carriers seeking to enhance their network capacity and flexibility. With its support for multiple protocols, advanced WDM technology, modular architecture, and management capabilities, the ONS 15540 stands out as a powerful asset for meeting the demands of today’s communication landscape.