Dell SC1425 technical specifications CPU Information Screen, System Setup Program Options

When you enter the System Setup program, the main System Setup program screen appears (see Figure 3-1).

Figure 3-1. Main System Setup Program Screen

Table 3-2 lists the options and descriptions for the information fields that appear on the main System Setup program screen.

NOTE: The options for the System Setup program change based on the system configuration.

NOTE: The System Setup program defaults are listed under their respective options, where applicable.

Table 3-2. System Setup Program Options

Option	Description
System Time	Resets the time on the system's internal clock.
System Date	Resets the date on the system's internal calendar.
System Memory	Displays the amount of system memory. This option does not have user-selectable settings.
System Memory Testing	Determines if memory is being tested during POST.
(Enabled default)
Video Memory	Displays the amount of video memory. This option does not have user-selectable settings.
OS Install Mode	Determines the maximum amount of memory available to the operating system. On sets the maximum memory to 256 MB. Off
(Off default)	makes all of the system memory available to the operating system. Some operating systems cannot install with more than 2 GB of
	system memory. Enable this option (On) during operating system installation and disable (Off) after installation.
CPU Information	See "CPU Information Screen."
SATA Port 0	Sets the drive type for the SATA hard drive(s).
SATA Port 1
Boot Sequence	Determines the order in which the system searches for boot devices during system startup. Available options can include the
	diskette drive, CD drive, hard drives, and network.
USB Flash Drive	Determines the emulation type for a USB flash drive. Hard disk allows the USB flash drive to act as a hard drive. Floppy allows the
Emulation Type	USB flash drive to act as a removable diskette drive. Auto automatically chooses an emulation type.
(Auto default)
Integrated Devices	See "Integrated Devices Screen."
PCI IRQ Assignment	Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any installed expansion cards
	that require an IRQ.
Console Redirection	See "Console Redirection Screen."
System Security	Displays a screen to configure the system password and setup password features. See "Using the System Password" and "Using
	the Setup Password" for more information.
Keyboard NumLock	Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards (does not apply to 84-
(On default)	key keyboards).
Report Keyboard Errors	Enables or disables reporting of keyboard errors during the POST. Select Report for host systems that have keyboards attached.
(Report default)	Select Do Not Report to suppress all error messages relating to the keyboard or keyboard controller during POST. This setting
	does not affect the operation of the keyboard itself if a keyboard is attached to the system.
Asset Tag	Displays the customer-programmable asset tag number for the system if an asset tag number has been assigned. To enter an
	asset tag number of up to 10 characters into NVRAM, see "Assigning or Deleting an Asset Tag Number."

CPU Information Screen