Dell HX574, R905 owner manual Replacing the Riser Board, Riser board socket

Figure 3-13. Installing or Removing a Riser Board

2

1

4

3

1	riser board	2	retention latches (2)
3	riser board socket	4	riser guide posts (2)

Replacing the Riser Board

1To install the riser board, make sure both riser retention latches are completely open, then align the riser with the two riser guide posts on the system board and lower the riser board onto the system board. See Figure 3-13.

2Close both retention latches at the same time until the latches are horizontal and the riser board is locked into place.

82

Installing System Components