Dell R610 manual Led, Power Supply status, Indicator Indicator code

Dell™ PowerEdge™ R610 Technical Guidebook

D. Back Panel View and Features

The following components are located on the rear panel of the PowerEdge R610 enclosure:

•(1) 15-pin VGA connector

•(1) 9-pin serial port connector

•(4) Integrated 10/100/1000 Ethernet RJ-45 connectors

•(1) Rear system ID button

•(1) Active ID Cable Management Arm external LED jack

•(2) USB ports

•(1) (Optional) iDRAC6 Enterprise RJ-45 port

•(1) (Optional) iDRAC6 Express VFlash media slot

•(2) PCIe slots

E. Power Supply Indicators

The PSUs on the PowerEdge R610 have one status bi-color LED: green for AC power present and amber for a fault.

led

F. NIC Indicators

Power Supply status

AC power is not present

AC power is present

Fault of any kind is detected

DC power is applied to the system

PSU mismatch (when hot-added/swapped)

indicator

indicator code

Link and activity indicators are off	The NIC is not connected to the network
Link indicator is green	The NIC is connected to a valid network link at 1000 Mbps
Link indicator is amber	The NIC is connected to a valid network link at 1000 Mbps
Activity indicator is green blinking	Network data is being sent or received

9