To remove a password:
•Enter the current password in the Current password text box.
•Leave the New password and Confirm new password text boxes blank.
If you forget your password, contact Dell for technical assistance.
Password Guidelines
Consider these guidelines when you create a password:
•Use secure passwords for your storage array. A password should be easy for you to remember but difficult for others to determine. Consider using numbers or special characters in the place of letters, such as a 1 in the place of the letter I, or the at sign (@) in the place of the letter a.
•For increased protection, use a long password with at least 15 alphanumeric characters. The maximum password length is 30 characters.
•Passwords are case sensitive.
•For security reasons, you can attempt to enter a password only ten times before the storage array enters a lockout state. Before you can try to enter a password again, you must wait ten minutes for the storage array to reset.
Resetting a Password
Perform this procedure when you have lost or forgotten your password and you need to reset it.
Connecting the Serial Cable
1Remove the serial cable from the password reset cable package.
2Connect the DB9 (oval) end of the cable to the serial port on the computer to be used to communicate with the RAID Controller module.
3Connect the
22