Compaq 1850R manual Compaq SmartStart Installation, Manual Installation, Special Considerations

Page 143

5-12Server Configuration and Utilities

Compaq SmartStart Installation

If you use SmartStart to install the OS, the drivers are installed automatically.

Manual Installation

If you choose to configure the server without SmartStart, follow this procedure:

1.Insert the Compaq SmartStart and Support Software CD into the CD-ROM drive.

2.Boot your system.

3.Select Manual Installation.

4.Follow the instructions provided by the operating system that you are installing.

Special Considerations

￿

￿

￿

If you are running NetWare 3.2 there may be additional patches required. The most current patches are available from Novell at their support web site http:// support.novell.com, under Updates, Since 3.2 Enhancement Pack Release. If you are running intraNetWare or NetWare 4.11 the most current Support Packs are available from Novell at their support web site http:// support.novell.com, under intraNetWare, NetWare 4.11. Please run README.COM on any of the Support Software for Novell Products (NSSD) diskettes for more detailed driver installation instructions. NSSD v3.22 or newer provides support for the Compaq ProLiant 1850R server..

If you are running intraNetWare, Compaq recommends that you use LAN adapter drivers that have been upgraded to the latest Novell specification (ODI 3.3 compliant). These drivers can be found on the NSSD diskette #3, version 3.22 or newer. The LAN adapter drivers are located in the \NETWORK sub-directory. For example, if you want to load the driver for the Compaq NetFlex-3/P family of adapters, then from the NetWare console you would type:

LOAD A:\NETWORK\CPQNF3.LAN

If using the Compaq Integrated Netelligent 10/100 TX Controller on a ProLiant 1850R server and you do not plan to use the SmartStart installation process to setup your server, you must install updated support software for your controller to connect properly to the network, refer to Appendix G, “Updating LAN Drivers” for instructions.

Image 143
Contents Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide Contents Server Installation Overview Installing Hardware Options Cabling Guidelines Vii Integrated Management LogViii Appendix DAppendix G Page Text Conventions About This GuideXii About This Guide Symbols in TextSymbols on Equipment Xiii Rack StabilityGetting Help Compaq Web SiteXiv About This Guide Telephone NumbersProLiant 1850R Compaq ProLiant 1850R FeaturesCompaq ProLiant 1850R server with Wide Ultra2 Scsi 2Compaq ProLiant 1850R FeaturesCompaq ProLiant 1850R Front Components ConfigurationProLiant 1850R Front View ProLiant 1850R with Wide Ultra SCSI-3ProLiant 1850R with Wide Ultra2 Scsi 4Compaq ProLiant 1850R FeaturesIdentifier Compaq ProLiant 1850R Wide Ultra2 Front ComponentsIdentifier Description 6Compaq ProLiant 1850R FeaturesThumbscrew Identification Front Bezel Thumbscrew LocationsReference Description ProLiant 1850R Rear ComponentsRear Panel Components ProLiant 1850R Internal Components 8Compaq ProLiant 1850R FeaturesLocating ProLiant 1850R Server Internal Components Inside View of the ProLiant 1850R ServerIndustry Support Standard FeaturesProcessors and Processor Power Modules 10Compaq ProLiant 1850R Features Rear view of expansion slot locations Disk ControllerWide Ultra SCSI-3 Models 12Compaq ProLiant 1850R FeaturesIntegrated Network Controller Mass StorageDescription of ProLiant 1850R Media Bays Wide Ultra2 Scsi Models 14Compaq ProLiant 1850R FeaturesDescription of ProLiant 1850R Wide Ultra2 Media Bays Standard InterfacesVideo Hot Plug Power SupplyWarranty 16Compaq ProLiant 1850R FeaturesDefault Configuration Server Management ConfigurationServer Management 18Compaq ProLiant 1850R FeaturesCompaq SmartStart Compaq Insight Manager Fault Tolerance20Compaq ProLiant 1850R Features Compaq System Configuration UtilityAutomatic Server Recovery-2 ASR-2 Compaq Integrated Remote Console Front Panel Status LEDs Description 22Compaq ProLiant 1850R FeaturesStatus LEDs Front Panel Status LEDsRJ-45 LED Indicators Security FeaturesHot-Plug Power Supply LED Insight Manager Alert DiagnosticsPre-Failure Warranty 24Compaq ProLiant 1850R FeaturesServer Installation Overview Rack Builder Configuration Tool 2Server Installation OverviewRack Warnings and Precautions 4Server Installation Overview Server Warnings and PrecautionsSpace Requirements Power RequirementsOptimum Environment Grounding Temperature RequirementsRack Internal Temperature Maximums 6Server Installation OverviewBlanking Panels 8Server Installation Overview Installation SequenceCompaq ProLiant 1850R Setup and Installation Guide Locating Materials 10Server Installation OverviewUnpacking the Rack Server Reference Information 12Server Installation Overview Installing Expansion Boards Other Major Hardware OptionsSlide rail assemby components Slide Rail Assembly ComponentsRemoving server rail from outer bracket rail 14Server Installation OverviewSeparated outer bracket rail top and server rail 16Server Installation Overview Compaq ProLiant 1850R Setup and Installation Guide 18Server Installation Overview Attaching outer bracket rail to rack mounting bracket Measuring with the Template 20Server Installation Overview10. Measuring with the template Inserting Cage Nuts in the Rack Frame22Server Installation Overview Attaching the Rack Mounting Bracket Assembly to the RackCompaq ProLiant 1850R Setup and Installation Guide 24Server Installation Overview Attaching Server Rails to the Server Attaching the Server Bracket toLoading the Rack Server 26Server Installation Overview18. Loading the rack server Attaching the Cable Management Arm 28Server Installation Overview21. Securing the cable management arm rack bracket 30Server Installation Overview Connecting the Power Cord Peripheral DevicesConnector or LED Rear Panel Connectors/LED25. Securing the power supply power cord cable 32Server Installation Overview26. Securing cables to the cable management arm Powering Up the Server34Server Installation Overview Configuring the Server with Compaq SmartStart28. Inserting the CD-ROM into the CD-ROM drive 36Server Installation Overview Using the Power SwitchUsing Diagnostics Tools Registering Your Server Routine MaintenanceOptional Installation Service Installing Hardware Options 2Installing Hardware Options Accessing Non Hot-Plug AreasAccessing Processors, Memory Sockets, System Board Pull the server out from the rack 4Installing Hardware Options Installing a Processor and Processor Power ModuleProcessor and processor power module slot locations Processor and Processor Power Module slot locations6Installing Hardware Options Installing a processor power module Installing a Processor Power ModulePart Numbers Dimm Option Kit Description 8Installing Hardware OptionsAdding Memory to the ProLiant 1850R Server Dimm Option Kit Part NumbersDimm Socket Identification Maximum Memory ConfigurationIdentifying Expansion Slots Installing DIMMs10Installing Hardware Options ProLiant 1850R riser board slots PCI Slots12Installing Hardware Options Installing an Expansion Board12. Removing slot cover Replacing the Riser Board Riser Board Brace 14Installing Hardware OptionsRemoving Expansion Board Shipping Bracket Replacing the Riser Board Riser Board BraceReplace all expansion boards 16Installing Hardware Options Installing Removable Media DevicesGeneral Installation Guidelines Bit Installing ProLiant 1850R Mass Storage DevicesWide Ultra2 Scsi model 18Installing Hardware OptionsRemoving the 1.44-MB Diskette Drive floppy drive Replacing the 1.44-MB Diskette Drive Floppy20. Releasing the diskette drive 20Installing Hardware OptionsTo enable the power switch security feature Enabling the Power Switch Security FeatureInstalling the 1.44-MB Diskette Drive Floppy Drive 23. Inserting the power switch into the front bezel 22Installing Hardware OptionsRemoving the CD-ROM Drive Installing the CD-ROM DriveReplacing the CD-ROM Drive Attaching Mass Storage Devices Installing External Storage DevicesInstalling a 3.5-Inch Drive into a 5.25-Inch Drive Bay 24Installing Hardware Options26. Removing the removable media tray from the server 28. Installing and securing the drive into the chassis 26Installing Hardware Options29. Connecting the drive cables Installing a Half-Height Device30. Installing a half-height device 28Installing Hardware OptionsInstalling a Full-Height Device DLT Tape Drive 30Installing Hardware Options Installing Hot-Plug Wide Ultra SCSI-3 Drives Accessing the Hot-Plug AreasScsi ID Numbers for Wide Ultra SCSI-3 Models Installing Hot-Plug Wide Ultra2 Scsi Drives32Installing Hardware Options Scsi ID Numbers for Wide Ultra2 Scsi Models 34Installing Hardware Options Installing a Hot-Plug Redundant Power SupplyPlug the power cord into the new hot-plug power supply 42. Plugging in the power cord 36Installing Hardware OptionsClose the rear rack door Cabling Guidelines 2Cabling Guidelines Rear Panel ConnectorsRear Panel Connectors Ref.ConnectorScsi connectors on the system board Internal Connectors4Cabling Guidelines Important ConnectorsCabling the Server’s Rear Panel Cables Plug in the power supply cables and secure 6Cabling Guidelines Additional Mass Storage DevicesScsi Hard Drive Installation Guidelines ProLiant 1850R Server Cable Kit Contents ProLiant 1850R Server Cables and Server Cable Kit Contents 10Cabling Guidelines Scsi Cable ConnectorsDetermining the Cables you Need Scsi Cabling Guidelines12Cabling Guidelines Internal Cabling for the Compaq ProLiant 1850R Internal CablingSee Note 14Cabling GuidelinesCompaq ProLiant 1850RCompaq ProLiant 1850R ProLiant Storage System External Cabling for Primary Storage OnlyExternal Cabling for Primary Storage Only 15/30 DLT Drive External Cabling for Secondary StorageExternal Cabling for Secondary Storage 16Cabling GuidelinesProLiant 1850R Cabling Examples 18Cabling Guidelines Cabling a DLT Tape Drive to Scsi PortCabling a Half-Height Tape Drive Scsi Port ProLiant 1850R Maximum External Storage Cabling Compaq System Configuration Utility Server Configuration UtilitiesResolving Resource Conflicts 2Server Configuration and UtilitiesSystem Configuration Utility Main Menu Starting the System Configuration Utility4Server Configuration and Utilities Configuring HardwareView or Edit Details Drive Array ConfigurationCreating a New System Partition Setting Power-On Defaults6Server Configuration and Utilities System PartitionUpgrading the System Partition Verifying the System Partition8Server Configuration and Utilities Configuration BackupConfiguration Backup Configuration History Files Single Processor Operating Support Configuring PCI Boards AutomaticallyInstalling an Operating System Removing BoardsSMP Operating System Support 10Server Configuration and UtilitiesNovell Device Drivers from Compaq Loading Compaq Device DriversSpecial Considerations Compaq SmartStart InstallationManual Installation 12Server Configuration and UtilitiesCompaq 14Server Configuration and Utilities SCO OpenServer and SCO UnixWare Device Drivers from Compaq 16Server Configuration and Utilities IBM OS/2 Device Drivers from Compaq 18Server Configuration and Utilities Banyan Vines Device Drivers from Compaq Retail InstallationSunSolaris Device Drivers from Compaq 20Server Configuration and Utilities Diagnostics and Other UtilitiesOperating System Driver Type Driver File Name Controller Naming ConventionsController Driver Naming Conventions 22Server Configuration and Utilities Multiple Ways of Viewing the Log Integrated Management Log2Compaq Integrated Management Log Viewing the Event ListPrinting the Event List Compaq Survey Utility4Compaq Integrated Management Log List of EventsEvent Messages Operating System Event Type Event Message Post ErrorPower Subsystem Automatic Server RecoveryModifications Federal Communications Commission Notice2Regulatory Compliance Notices CablesAvis Canadien European Union NoticeJapanese Notice Canadian Notice4Regulatory Compliance Notices Laser Safety WarningsTaiwan Notice Laser Devices Compliance with Cdrh RegulationsLaser Information Compliance with International RegulationsLaser Product Label 6Regulatory Compliance Notices Battery Replacement NoticeGrounding Methods Electrostatic Discharge2Electrostatic Discharge General Requirements Power Cord Set RequirementsCountry Accredited Agency Table C-1 Power Cord Set Requirements By Country2Power Cord Set Requirements Country-Specific RequirementsSystem Board Battery Replacement Installing a New Battery2Installing a New Battery Installing the System Board BatteryFigure D-2. Attaching the battery to the designated location Plug in the server and reconnect any external devices 4Installing a New BatterySetting System Board Switches Switches and JumpersFunction Default Position System Configuration Switch Settings S1 Settings2Switches and Jumpers Processor 350 MHz 400MHz 450MHz Processor Switch SettingsTable E-2 Processor Switch Settings Function Default Position for4Switches and Jumpers NIC Operating ModeScsi Device Jumper Settings Table E-3 Scsi Device Jumper ID SettingsSystem Board Battery Jumper Settings ProLiant 1850R Specifications ProLiant 1850R Specifications2Specifications and Connector Interfaces Connector InterfacesIntroduction Installing NetWare Lan DriversOperating Systems Requiring Special LAN Driver Installation 2Updating LAN Drivers For Novell Products Nssd version 3.22A diskettesLetter\PRODUCTS\NW411\IBM\411\LANDRV directory Setup intraNetWare for Small Business from Compaq\NETWORK and press Enter 4Updating LAN DriversSetup NetWare for Small Business LAN Driver Update Procedure NetWare for Small Business6Updating LAN Drivers LAN Driver Update Procedure For NetWareInstalling Windows NT 4.0 LAN Drivers For Windows NT 4.0 Ntssd version 2.08 diskettesLAN Driver update procedure for IBM Operating Systems Installing IBM OS/2 LAN DriversLAN Driver Installation Procedure for Window NT 8Updating LAN Drivers Installing Banyan Vines LAN DriverAdditional drivers are now being installed Please wait 10Updating LAN Drivers Index-1 SymbolsNumbers CD-ROM Index-2Index-3 Index-4 Index-5 ISA Index-6Index-7 LEDIndex-8 Index-9 PCIIndex-10 Scsi Index-11Index-12 Index-13 Index-14
Related manuals
Manual 164 pages 5.08 Kb Manual 3 pages 33.62 Kb

1850R specifications

The Compaq 1850R, introduced in the late 1990s, is a robust and versatile server known for its reliability and performance. This rack-mounted server was designed to cater to the evolving needs of businesses that required high availability and scalability in their IT infrastructure.

At the core of the Compaq 1850R is its support for dual Intel Pentium III processors. This dual-processor configuration provides enhanced multitasking capabilities, allowing the server to handle more simultaneous processes effectively. With a clock speed of up to 1 GHz, businesses could run demanding applications and services with improved speed and efficiency.

One of the standout features of the Compaq 1850R is its impressive memory capacity. The server supports up to 8GB of SDRAM, which allows it to manage larger datasets and facilitate better performance for memory-intensive applications. This makes the 1850R an ideal choice for database management and enterprise resource planning.

Storage options are another highlight of the Compaq 1850R. The server can accommodate multiple hot-swappable hard drive bays, supporting both SCSI and IDE drives. This flexibility allows organizations to scale their storage needs as their data requirements grow. The ability to add or replace drives without downtime is a significant advantage for maintaining high availability environments.

In terms of networking, the Compaq 1850R features integrated Ethernet ports for reliable network connectivity. The server also supports advanced RAID configurations, which enhances data protection and improves performance by distributing I/O across multiple drives. This feature is particularly important for businesses that rely heavily on data integrity and availability.

The design of the 1850R is optimized for rack mounting, a standard for enterprise environments looking to maximize space and efficiency. Its compact form factor fits seamlessly into standard 19-inch racks, making it suitable for various server rooms and data centers.

Overall, the Compaq 1850R is a powerful server that combines solid processing capability, extensive memory support, and flexible storage options. It remains a valuable asset for organizations seeking to build a reliable and scalable IT infrastructure. As businesses continue to demand efficiency and performance from their servers, the 1850R stands as a testament to Compaq's commitment to quality and innovation in the tech industry.