Compaq manual Compaq SmartStart, Server Management, 18Compaq ProLiant 1850R Features

Page 32

1-18Compaq ProLiant 1850R Features

An information message indicating that you are running with a default configuration occurs each time you boot the system until you run the System Configuration program.

Compaq SmartStart

Compaq SmartStart, which is located on the Compaq SmartStart and Support Software CD, is the intelligent way to configure your Compaq server with major operating system software. SmartStart helps you achieve a well-integrated server that ensures maximum managability and dependability. For further information about configuration, see Chapter 5, “Server Configuration and Utilities.”

Server Management

￿￿

￿

The Server Parameter Tracking utility provides timely server environment and subsystem information by using a combination of hardware, firmware, and industry-standard management software. Information provided by this utility includes fault, performance, and configuration status.

The Server Fault Tolerance feature provides many fault tolerance options for disk subsystem and memory system error correction.

The Rapid Recovery Services provides fast identification and resolution of complex faults. This integrated server management provides: Server Health Logs, Automatic Server Recover-2 (ASR-2), and Compaq Integrated Remote Console.

Integrated Management Log (IML) provides a detailed log of key system events. This log is accessible through Compaq Insight Manager and the Remote Insight Board.

Image 32
Contents Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide Contents Server Installation Overview Installing Hardware Options Cabling Guidelines Integrated Management Log ViiAppendix D ViiiAppendix G Page About This Guide Text ConventionsXii About This Guide Symbols in TextSymbols on Equipment Rack Stability Getting HelpCompaq Web Site XiiiTelephone Numbers Xiv About This GuideCompaq ProLiant 1850R Features ProLiant 1850R2Compaq ProLiant 1850R Features Compaq ProLiant 1850R server with Wide Ultra2 ScsiConfiguration ProLiant 1850R Front ViewProLiant 1850R with Wide Ultra SCSI-3 Compaq ProLiant 1850R Front Components4Compaq ProLiant 1850R Features ProLiant 1850R with Wide Ultra2 ScsiCompaq ProLiant 1850R Wide Ultra2 Front Components Identifier6Compaq ProLiant 1850R Features Thumbscrew IdentificationFront Bezel Thumbscrew Locations Identifier DescriptionReference Description ProLiant 1850R Rear ComponentsRear Panel Components 8Compaq ProLiant 1850R Features Locating ProLiant 1850R Server Internal ComponentsInside View of the ProLiant 1850R Server ProLiant 1850R Internal ComponentsIndustry Support Standard FeaturesProcessors and Processor Power Modules 10Compaq ProLiant 1850R Features Disk Controller Rear view of expansion slot locations12Compaq ProLiant 1850R Features Integrated Network ControllerMass Storage Wide Ultra SCSI-3 ModelsDescription of ProLiant 1850R Media Bays 14Compaq ProLiant 1850R Features Wide Ultra2 Scsi ModelsStandard Interfaces Description of ProLiant 1850R Wide Ultra2 Media BaysHot Plug Power Supply Warranty16Compaq ProLiant 1850R Features VideoServer Management Configuration Default ConfigurationServer Management 18Compaq ProLiant 1850R FeaturesCompaq SmartStart Fault Tolerance Compaq Insight Manager20Compaq ProLiant 1850R Features Compaq System Configuration UtilityAutomatic Server Recovery-2 ASR-2 Compaq Integrated Remote Console 22Compaq ProLiant 1850R Features Status LEDsFront Panel Status LEDs Front Panel Status LEDs DescriptionRJ-45 LED Indicators Security FeaturesHot-Plug Power Supply LED Diagnostics Pre-Failure Warranty24Compaq ProLiant 1850R Features Insight Manager AlertServer Installation Overview 2Server Installation Overview Rack Builder Configuration ToolRack Warnings and Precautions Server Warnings and Precautions 4Server Installation OverviewSpace Requirements Power RequirementsOptimum Environment Temperature Requirements Rack Internal Temperature Maximums6Server Installation Overview GroundingBlanking Panels Installation Sequence 8Server Installation OverviewCompaq ProLiant 1850R Setup and Installation Guide Locating Materials 10Server Installation OverviewUnpacking the Rack Server Reference Information Installing Expansion Boards Other Major Hardware Options 12Server Installation OverviewSlide Rail Assembly Components Slide rail assemby components14Server Installation Overview Removing server rail from outer bracket railSeparated outer bracket rail top and server rail 16Server Installation Overview Compaq ProLiant 1850R Setup and Installation Guide 18Server Installation Overview Attaching outer bracket rail to rack mounting bracket 20Server Installation Overview Measuring with the TemplateInserting Cage Nuts in the Rack Frame 10. Measuring with the templateAttaching the Rack Mounting Bracket Assembly to the Rack 22Server Installation OverviewCompaq ProLiant 1850R Setup and Installation Guide 24Server Installation Overview Attaching the Server Bracket to Attaching Server Rails to the Server26Server Installation Overview Loading the Rack Server18. Loading the rack server 28Server Installation Overview Attaching the Cable Management Arm21. Securing the cable management arm rack bracket Connecting the Power Cord Peripheral Devices 30Server Installation OverviewRear Panel Connectors/LED Connector or LED32Server Installation Overview 25. Securing the power supply power cord cablePowering Up the Server 26. Securing cables to the cable management armConfiguring the Server with Compaq SmartStart 34Server Installation Overview28. Inserting the CD-ROM into the CD-ROM drive 36Server Installation Overview Using the Power SwitchUsing Diagnostics Tools Registering Your Server Routine MaintenanceOptional Installation Service Installing Hardware Options 2Installing Hardware Options Accessing Non Hot-Plug AreasAccessing Processors, Memory Sockets, System Board Pull the server out from the rack Installing a Processor and Processor Power Module 4Installing Hardware OptionsProcessor and Processor Power Module slot locations Processor and processor power module slot locations6Installing Hardware Options Installing a Processor Power Module Installing a processor power module8Installing Hardware Options Adding Memory to the ProLiant 1850R ServerDimm Option Kit Part Numbers Part Numbers Dimm Option Kit DescriptionMaximum Memory Configuration Dimm Socket IdentificationIdentifying Expansion Slots Installing DIMMs10Installing Hardware Options PCI Slots ProLiant 1850R riser board slotsInstalling an Expansion Board 12Installing Hardware Options12. Removing slot cover 14Installing Hardware Options Removing Expansion Board Shipping BracketReplacing the Riser Board Riser Board Brace Replacing the Riser Board Riser Board BraceReplace all expansion boards 16Installing Hardware Options Installing Removable Media DevicesGeneral Installation Guidelines Installing ProLiant 1850R Mass Storage Devices Bit18Installing Hardware Options Wide Ultra2 Scsi modelReplacing the 1.44-MB Diskette Drive Floppy Removing the 1.44-MB Diskette Drive floppy drive20Installing Hardware Options 20. Releasing the diskette driveTo enable the power switch security feature Enabling the Power Switch Security FeatureInstalling the 1.44-MB Diskette Drive Floppy Drive 22Installing Hardware Options 23. Inserting the power switch into the front bezelRemoving the CD-ROM Drive Installing the CD-ROM DriveReplacing the CD-ROM Drive Installing External Storage Devices Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay24Installing Hardware Options Attaching Mass Storage Devices26. Removing the removable media tray from the server 26Installing Hardware Options 28. Installing and securing the drive into the chassisInstalling a Half-Height Device 29. Connecting the drive cables28Installing Hardware Options 30. Installing a half-height deviceInstalling a Full-Height Device DLT Tape Drive 30Installing Hardware Options Accessing the Hot-Plug Areas Installing Hot-Plug Wide Ultra SCSI-3 DrivesScsi ID Numbers for Wide Ultra SCSI-3 Models Installing Hot-Plug Wide Ultra2 Scsi Drives32Installing Hardware Options Scsi ID Numbers for Wide Ultra2 Scsi Models Installing a Hot-Plug Redundant Power Supply 34Installing Hardware OptionsPlug the power cord into the new hot-plug power supply 36Installing Hardware Options 42. Plugging in the power cordClose the rear rack door Cabling Guidelines Rear Panel Connectors Rear Panel ConnectorsRef.Connector 2Cabling GuidelinesInternal Connectors Scsi connectors on the system board4Cabling Guidelines Important ConnectorsCabling the Server’s Rear Panel Cables Plug in the power supply cables and secure Additional Mass Storage Devices 6Cabling GuidelinesScsi Hard Drive Installation Guidelines ProLiant 1850R Server Cable Kit Contents ProLiant 1850R Server Cables and Server Cable Kit Contents Scsi Cable Connectors 10Cabling GuidelinesScsi Cabling Guidelines Determining the Cables you Need12Cabling Guidelines Internal Cabling Internal Cabling for the Compaq ProLiant 1850R14Cabling Guidelines Compaq ProLiant1850R See NoteCompaq ProLiant 1850R ProLiant Storage System External Cabling for Primary Storage OnlyExternal Cabling for Primary Storage Only External Cabling for Secondary Storage External Cabling for Secondary Storage16Cabling Guidelines 15/30 DLT DriveProLiant 1850R Cabling Examples 18Cabling Guidelines Cabling a DLT Tape Drive to Scsi PortCabling a Half-Height Tape Drive Scsi Port ProLiant 1850R Maximum External Storage Cabling Server Configuration Utilities Compaq System Configuration Utility2Server Configuration and Utilities Resolving Resource ConflictsStarting the System Configuration Utility System Configuration Utility Main MenuConfiguring Hardware 4Server Configuration and UtilitiesDrive Array Configuration View or Edit DetailsSetting Power-On Defaults 6Server Configuration and UtilitiesSystem Partition Creating a New System PartitionVerifying the System Partition Upgrading the System Partition8Server Configuration and Utilities Configuration BackupConfiguration Backup Configuration History Files Configuring PCI Boards Automatically Installing an Operating SystemRemoving Boards Single Processor Operating Support10Server Configuration and Utilities SMP Operating System SupportLoading Compaq Device Drivers Novell Device Drivers from CompaqCompaq SmartStart Installation Manual Installation12Server Configuration and Utilities Special ConsiderationsCompaq 14Server Configuration and Utilities SCO OpenServer and SCO UnixWare Device Drivers from Compaq 16Server Configuration and Utilities IBM OS/2 Device Drivers from Compaq 18Server Configuration and Utilities Banyan Vines Device Drivers from Compaq Retail InstallationSunSolaris Device Drivers from Compaq Diagnostics and Other Utilities 20Server Configuration and UtilitiesOperating System Driver Type Driver File Name Controller Naming ConventionsController Driver Naming Conventions 22Server Configuration and Utilities Integrated Management Log Multiple Ways of Viewing the LogViewing the Event List 2Compaq Integrated Management LogCompaq Survey Utility Printing the Event List4Compaq Integrated Management Log List of EventsEvent Messages Event Type Event Message Post Error Power SubsystemAutomatic Server Recovery Operating SystemFederal Communications Commission Notice ModificationsCables 2Regulatory Compliance NoticesEuropean Union Notice Japanese NoticeCanadian Notice Avis CanadienLaser Safety Warnings Taiwan Notice Laser DevicesCompliance with Cdrh Regulations 4Regulatory Compliance NoticesLaser Information Compliance with International RegulationsLaser Product Label Battery Replacement Notice 6Regulatory Compliance NoticesElectrostatic Discharge Grounding Methods2Electrostatic Discharge Power Cord Set Requirements General RequirementsTable C-1 Power Cord Set Requirements By Country 2Power Cord Set RequirementsCountry-Specific Requirements Country Accredited AgencyInstalling a New Battery System Board Battery ReplacementInstalling the System Board Battery 2Installing a New BatteryFigure D-2. Attaching the battery to the designated location 4Installing a New Battery Plug in the server and reconnect any external devicesSwitches and Jumpers Setting System Board SwitchesFunction Default Position System Configuration Switch Settings S1 Settings2Switches and Jumpers Processor Switch Settings Table E-2 Processor Switch SettingsFunction Default Position for Processor 350 MHz 400MHz 450MHzNIC Operating Mode Scsi Device Jumper SettingsTable E-3 Scsi Device Jumper ID Settings 4Switches and JumpersSystem Board Battery Jumper Settings ProLiant 1850R Specifications ProLiant 1850R SpecificationsConnector Interfaces 2Specifications and Connector InterfacesIntroduction Installing NetWare Lan DriversOperating Systems Requiring Special LAN Driver Installation For Novell Products Nssd version 3.22A diskettes 2Updating LAN DriversSetup intraNetWare for Small Business from Compaq Letter\PRODUCTS\NW411\IBM\411\LANDRV directory4Updating LAN Drivers \NETWORK and press EnterLAN Driver Update Procedure NetWare for Small Business Setup NetWare for Small BusinessLAN Driver Update Procedure For NetWare Installing Windows NT 4.0 LAN DriversFor Windows NT 4.0 Ntssd version 2.08 diskettes 6Updating LAN DriversLAN Driver update procedure for IBM Operating Systems Installing IBM OS/2 LAN DriversLAN Driver Installation Procedure for Window NT Installing Banyan Vines LAN Driver 8Updating LAN DriversAdditional drivers are now being installed Please wait 10Updating LAN Drivers Index-1 SymbolsNumbers Index-2 CD-ROMIndex-3 Index-4 Index-5 Index-6 ISALED Index-7Index-8 PCI Index-9Index-10 Index-11 ScsiIndex-12 Index-13 Index-14
Related manuals
Manual 164 pages 5.08 Kb Manual 3 pages 33.62 Kb

1850R specifications

The Compaq 1850R, introduced in the late 1990s, is a robust and versatile server known for its reliability and performance. This rack-mounted server was designed to cater to the evolving needs of businesses that required high availability and scalability in their IT infrastructure.

At the core of the Compaq 1850R is its support for dual Intel Pentium III processors. This dual-processor configuration provides enhanced multitasking capabilities, allowing the server to handle more simultaneous processes effectively. With a clock speed of up to 1 GHz, businesses could run demanding applications and services with improved speed and efficiency.

One of the standout features of the Compaq 1850R is its impressive memory capacity. The server supports up to 8GB of SDRAM, which allows it to manage larger datasets and facilitate better performance for memory-intensive applications. This makes the 1850R an ideal choice for database management and enterprise resource planning.

Storage options are another highlight of the Compaq 1850R. The server can accommodate multiple hot-swappable hard drive bays, supporting both SCSI and IDE drives. This flexibility allows organizations to scale their storage needs as their data requirements grow. The ability to add or replace drives without downtime is a significant advantage for maintaining high availability environments.

In terms of networking, the Compaq 1850R features integrated Ethernet ports for reliable network connectivity. The server also supports advanced RAID configurations, which enhances data protection and improves performance by distributing I/O across multiple drives. This feature is particularly important for businesses that rely heavily on data integrity and availability.

The design of the 1850R is optimized for rack mounting, a standard for enterprise environments looking to maximize space and efficiency. Its compact form factor fits seamlessly into standard 19-inch racks, making it suitable for various server rooms and data centers.

Overall, the Compaq 1850R is a powerful server that combines solid processing capability, extensive memory support, and flexible storage options. It remains a valuable asset for organizations seeking to build a reliable and scalable IT infrastructure. As businesses continue to demand efficiency and performance from their servers, the 1850R stands as a testament to Compaq's commitment to quality and innovation in the tech industry.