Brocade Communications Systems 53-1000571-01 manual Introducing the SAN I/O Module

Page 11

 

Chapter

Introducing the SAN I/O Module

1

 

 

 

 

The Brocade 4424 is a 24-port Fibre Channel module with 8 external ports and 16 internal ports designed for installation in a Dell PowerEdge M1000e Blade Server Enclosure. The product ships with 12 ports enabled and can be upgraded to 24 ports through Ports on Demand (POD) licensing. These ports support link speeds up to 4Gbit/sec.

Dual function and access gateway configurations

The SAN I/O Module ships in one of two configurations:

•Dual Function configuration. In this configuration, the SAN I/O Module operates in Standard Full Fabric Switch mode by default. The module can also operate in Access Gateway mode.

•Access Gateway configuration. In this configuration the SAN I/O Module operates exclusively in Access Gateway mode. Access Gateway simplifies SAN deployment by using NPIV. NPIV provides Fibre Channel switch functions that improve SAN I/O Module scalability, manageability, and interoperability. For more information on Access Gateway, refer to the following:

-For a list of SAN I/O Module F_Ports mapped to N_Ports in the SAN I/O Module as shipped from the factory, refer to “Access Gateway Mode default port mapping” on page 25.

-For general information and details on using Access Gateway, refer to the Brocade Access Gateway Administrator’s Guide.

-Since Access Gateway relies on NPIV technology for its connection to the edge fabric you may have to prepare the edge fabric before connecting it to Access Gateway. Please refer to the SAN TECH NOTE – Preparing to Install the Brocade Access Gateway for specific instructions.

NOTE

When shipped in Access Gateway configuration, a Switch (Fabric) license is required to operate the module in Standard Full Fabric Switch mode.

NOTE

Access Gateway cannot be connected directly into an array; it requires a fabric to support NPIV.

Determining module configuration

The factory configuration type is identified by the part number on a label attached to the module. Refer to Figure 3 on page 5 for label location.

•If the part number is DL-4424-0001, then the SAN I/O Module is configured in Standard Full Fabric Switch mode. Note that Full Fabric Switch mode is the default setting when shipped from the factory. Access Gateway mode can also be enabled on this module.

4424 Blade Server SAN I/O Module Hardware Reference Manual

1

53-0000571-01

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Brocade 4424 Blade Server SAN I/O Module Title Publication Number Summary of Changes Date Brocade Communications Systems, IncorporatedContents Index What’s new in this document About this documentHow this document is organized Supported hardware and softwareText formatting Document conventionsBrocade resources Additional informationOther industry resources Optional brocade featuresGetting technical help FT00X0054E9 Document feedbackBlade Server SAN I/O Module Hardware Reference Manual Introducing the SAN I/O Module Dual function and access gateway configurationsDetermining module configuration Full Fabric Switch mode FeaturesPorts on Demand POD Access Gateway modePort Licensing External Ports Internal Ports Hardware DescriptionPort side Nonport side SFPs ISL trunking groupsLabeling Access Gateway Mode Optional featuresUnpacking and installing the SAN I/O Module Full Fabric Switch ModeCabling guidelines Items required Configuring the SAN I/O ModuleTask 1 Establish a terminal session with the SAN I/O Module Using the SAN I/O Module CLI to set the IP addressModify the SAN I/O Module IP address Task 2 Changing the IP address Using the CMC CLI to set the IP addressUsing the CMC GUI to set the IP address Connecting the SAN I/O Module to the fabric Connecting the SAN I/O Module to the Ethernet networkConnecting the SAN I/O Module to the fabric Changing from Fabric Switch mode to Access Gateway mode Web Tools Command Line InterfaceActivating Ports on Demand POD Changing from Access Gateway Mode to Fabric Switch ModeActivating ports with a POD license Connecting to the SAN I/O Module Using Web ToolsPort negotiation Operating the SAN I/O ModuleInteroperability Operating System Version Accessing the SAN I/O ModuleOperating system support Example Post Output Interpreting Post resultsInterpreting LED activity Location Indicator Color OperationLocating the serial number Removing and replacing the SAN I/O ModuleRemoving an SFP from a Port Appendix SAN I/O Module specificationsAccess Gateway Mode default port mapping Processor and memory specificationsCondition Operating Non-operating Weight and physical dimensionsDimension Measurements Facility requirementsFibre Channel standards compliance Architectural specificationFeature Description Supported HBAsMIC Statement Republic of Korea Vcci statement Japan Regulatory complianceFCC warning US only Bsmi statement Republic of Taiwan Laser compliance CE statementCanadian requirements Environmental Protection Use Period Epup Disclaimer Environmental regulation complianceChina RoHS Pbde TS/HS Dual Language SheetRegulatory certifications Country Safety specification EMC specificationEnvironmental regulation compliance EMC certifications Index Blade Server SAN I/O Module Hardware Reference Manual Page Blade Server SAN I/O Module Hardware Reference Manual

53-1000571-01 specifications

Brocade Communications Systems has been a key player in the networking industry, offering a range of advanced products designed to improve data center efficiency and connectivity. One notable product is the Brocade 53-1000571-01, a versatile device that integrates modern networking technologies with user-friendly features.

The Brocade 53-1000571-01 is primarily recognized as a high-performance 16 Gbps Fibre Channel switch, designed to support the demanding requirements of both large data centers and enterprise environments. As networking needs continue to evolve, this switch provides the necessary scalability and reliability while maintaining cost-effectiveness.

One of the main features of the 53-1000571-01 is its support for both 8 Gbps and 16 Gbps Fibre Channel speeds, allowing it to accommodate various legacy systems while also preparing users for the latest high-speed data applications. This ensures that organizations can maximize their existing investments while equipping themselves for future growth.

Another significant characteristic of the Brocade 53-1000571-01 is its intelligent management capabilities. The device comes with Brocade Fabric OS, which provides advanced networking features like dynamic path optimization, automated configuration, and real-time monitoring. These capabilities help streamline network management tasks, improve operational efficiencies, and reduce the chances of human error.

Moreover, this switch is equipped with robust security features, including zoning and encrypted connections, which are crucial in protecting sensitive data within storage area networks. The Brocade 53-1000571-01 not only enhances connectivity but also provides secure and seamless data access that is vital for modern enterprises.

Its modular architecture enables seamless expansion and adaptability to meet growing data requirements. As businesses expand and storage needs surge, this switch can accommodate additional ports and connections without significant downtime or infrastructure overhaul.

In conclusion, the Brocade Communications Systems 53-1000571-01 stands out as a high-performance Fibre Channel switch that meets the diverse needs of today’s data-driven environments. Its combination of speed, intelligent management tools, robust security features, and modularity makes it a reliable choice for organizations looking to enhance their networking infrastructure and ensure future readiness.
Top Page Image Contents