Brocade Communications Systems 53-1000571-01 manual Cabling guidelines

Page 18

1 Cabling guidelines

5.Be sure that you have taken the necessary precautions for electrostatic sensitivity; then break the seal warning.

6.Slide the SAN I/O Module out of the antistatic sleeve and inspect it carefully for any obvious defects or shipping damage.

7.Locate the label that specifies the part number for the SAN I/O Module. Make a note of the part number because the part number indicates whether the SAN I/O Module was configured at the factory in Access Gateway or Standard Full Fabric Switch mode. (More information on Access Gateway and Full-Fabric Switch mode is provided in Chapter 2, “Configuring the SAN I/O Module”.)

If the part number is DL-4424-0003, then the SAN I/O Module is configured in Access Gateway mode.

If the part number is DL-4424-0001, then the SAN I/O Module is configured in Full Fabric Switch mode. Note that Full Fabric Switch mode is the default factory setting when the module is licensed for Dual Function mode. With Dual Function mode, you can enable the module for Access Gateway or Full Fabric Switch mode.

8.For complete instructions to install the SAN I/O Module into the Blade Server Enclosure, refer to the section on installing an I/O module in the Blade Server Enclosure Hardware Owner’s Manual.

Cabling guidelines

After modifying the SAN I/O Module’s IP address and domain name (if Module is in Fabric Switch mode), we recommend that you cable all external ports to fabric connections before bringing the SAN I/O Module online. Refer to Chapter 2, “Configuring the SAN I/O Module,” for steps on modifying the IP address.

Begin by cabling ports 17, 18, 19, 20, 21, 22, 23, and 0. Ports 17 and 18 are licensed at the factory as part of Dynamic Ports On Demand (DPOD). By cabling these ports first, you will not need to move licenses to other ports you may have cabled.

8

4424 Blade Server SAN I/O Module Hardware Reference Manual

 

53-0000571-01

Image 18
Contents Brocade 4424 Blade Server SAN I/O Module Brocade Communications Systems, Incorporated Title Publication Number Summary of Changes DateContents Index Supported hardware and software About this documentHow this document is organized What’s new in this documentDocument conventions Text formattingAdditional information Brocade resourcesOptional brocade features Getting technical helpOther industry resources Document feedback FT00X0054E9Blade Server SAN I/O Module Hardware Reference Manual Dual function and access gateway configurations Determining module configurationIntroducing the SAN I/O Module Features Full Fabric Switch modeAccess Gateway mode Ports on Demand PODHardware Description Port sidePort Licensing External Ports Internal Ports Nonport side ISL trunking groups LabelingSFPs Full Fabric Switch Mode Optional featuresUnpacking and installing the SAN I/O Module Access Gateway ModeCabling guidelines Configuring the SAN I/O Module Items requiredUsing the SAN I/O Module CLI to set the IP address Modify the SAN I/O Module IP addressTask 1 Establish a terminal session with the SAN I/O Module Using the CMC CLI to set the IP address Task 2 Changing the IP addressUsing the CMC GUI to set the IP address Connecting the SAN I/O Module to the Ethernet network Connecting the SAN I/O Module to the fabricConnecting the SAN I/O Module to the fabric Changing from Fabric Switch mode to Access Gateway mode Command Line Interface Web ToolsChanging from Access Gateway Mode to Fabric Switch Mode Activating Ports on Demand PODConnecting to the SAN I/O Module Using Web Tools Activating ports with a POD licenseOperating the SAN I/O Module InteroperabilityPort negotiation Accessing the SAN I/O Module Operating system supportOperating System Version Interpreting Post results Example Post OutputLocation Indicator Color Operation Interpreting LED activityRemoving and replacing the SAN I/O Module Locating the serial numberRemoving an SFP from a Port Processor and memory specifications SAN I/O Module specificationsAccess Gateway Mode default port mapping AppendixFacility requirements Weight and physical dimensionsDimension Measurements Condition Operating Non-operatingSupported HBAs Architectural specificationFeature Description Fibre Channel standards complianceRegulatory compliance FCC warning US onlyMIC Statement Republic of Korea Vcci statement Japan Bsmi statement Republic of Taiwan CE statement Canadian requirementsLaser compliance Environmental regulation compliance China RoHSEnvironmental Protection Use Period Epup Disclaimer TS/HS Dual Language Sheet PbdeCountry Safety specification EMC specification Regulatory certificationsEnvironmental regulation compliance EMC certifications Index Blade Server SAN I/O Module Hardware Reference Manual Page Blade Server SAN I/O Module Hardware Reference Manual

53-1000571-01 specifications

Brocade Communications Systems has been a key player in the networking industry, offering a range of advanced products designed to improve data center efficiency and connectivity. One notable product is the Brocade 53-1000571-01, a versatile device that integrates modern networking technologies with user-friendly features.

The Brocade 53-1000571-01 is primarily recognized as a high-performance 16 Gbps Fibre Channel switch, designed to support the demanding requirements of both large data centers and enterprise environments. As networking needs continue to evolve, this switch provides the necessary scalability and reliability while maintaining cost-effectiveness.

One of the main features of the 53-1000571-01 is its support for both 8 Gbps and 16 Gbps Fibre Channel speeds, allowing it to accommodate various legacy systems while also preparing users for the latest high-speed data applications. This ensures that organizations can maximize their existing investments while equipping themselves for future growth.

Another significant characteristic of the Brocade 53-1000571-01 is its intelligent management capabilities. The device comes with Brocade Fabric OS, which provides advanced networking features like dynamic path optimization, automated configuration, and real-time monitoring. These capabilities help streamline network management tasks, improve operational efficiencies, and reduce the chances of human error.

Moreover, this switch is equipped with robust security features, including zoning and encrypted connections, which are crucial in protecting sensitive data within storage area networks. The Brocade 53-1000571-01 not only enhances connectivity but also provides secure and seamless data access that is vital for modern enterprises.

Its modular architecture enables seamless expansion and adaptability to meet growing data requirements. As businesses expand and storage needs surge, this switch can accommodate additional ports and connections without significant downtime or infrastructure overhaul.

In conclusion, the Brocade Communications Systems 53-1000571-01 stands out as a high-performance Fibre Channel switch that meets the diverse needs of today’s data-driven environments. Its combination of speed, intelligent management tools, robust security features, and modularity makes it a reliable choice for organizations looking to enhance their networking infrastructure and ensure future readiness.