Belkin F1DP116SEA Listening TCP Port Number, Protocol, Inactivity Time-Out, Terminal-Server Mode

Page 32

Serial Ports

The following parameters are configurable in console-server mode:

Listening TCP Port Number

You can also access a serial port through the IP address of the Console Server and the listening TCP port number of the serial port.

If the IP address of the Console Server and the serial port are assigned as 192.168.123.100 and the listening TCP port number is 4001, the user can connect to the port as follows: telnet 192.168.123.100 4001

Protocol

Select “Telnet”, “SSH”, or “Raw TCP” as the protocol. If users are using a telnet client program, select “Telnet”. If users are using an SSH client program, select “SSH”. When “Raw TCP” is selected, direct TCP socket communication is available between the Console Server and the remote host.

Inactivity Time-Out

Enable this feature to avoid a client holding on to a TCP connection when there has been no activity on a serial port for a long period of time. If “Inactivity timeout” is enabled, and there is no data activity between the Console Server and the telnet/SSH client for the specified inactivity time-out interval (i.e., no data activity through the serial port), the existing TCP session will automatically be closed. If you want to maintain the connection indefinitely, configure the inactivity time-out period to “0”.

TCP Keep-Alive (No Configuration Required)

In order to avoid TCP-connection lockup, the Console Server will continue to check the connection status between the telnet/SSH client and the Console Server by periodically sending “keep alive” packets. If the telnet/SSH client does not answer the packets, the system will assume that the connection is down. The Console Server will then close the existing telnet/SSH connection, regardless of the inactivity setting. This will prevent the TCP connection from locking when an application is improperly closed or the network link is interrupted.

Terminal-Server Mode

In terminal-server mode, the Console Server’s serial port is configured to wait for data from the device connected to the port. If data is detected, the Console Server will initiate a TCP session as a telnet or SSH client to a predefined server. The server must be defined by users before the port can be configured for a telnet or SSH client. This mode can be used to access servers on the network from a serial terminal. RawTCP is also supported with the terminal-server mode.

28

Page 31 Page 33
Image 32
Page 31 Page 33
Contents OmniView Serial Console Server F1DP116SeaTable of Contents Edit the Access Control List ACL Change Password Page Package Contents Product OverviewIntroduction Console Server provides the followingConsole Server Features In-band and out-of-band management Remote and secure power controllerAccess port lists for users Diverse devices managementJava Plug-In Equipment RequirementsSystem Requirements Ports Unit Display Diagrams Front/Rear Panel Link LEDIEC power LAN port Local console port LED Indicators, Button, and Connectors Power Red power indicationEthernet Link/Act/10/100Mbps Orange 10BaseT Ethernet connection establishedSpecifications GeneralLocal Installation Rack-Mounting Desktop or Rack-MountingMAC Address Serial Number Connecting the Target Devices to the Console Server DB9MNetwork Configuration Initial SettingsWeb-Browser Interface Identifying the IP AddressUser Name Default Password Access Privileges LoginUser Name Password Admin Main-Connect Network Configuration Network-ConfigurationSection Following figure depicts the structure of the interface Menu LayoutNetwork IP Config System RebootSystem Reset to Default Network Current IPWeb-Browser Management Interface Section Network Settings IP ConfigurationChain Rule IP FilteringSpecified host range Base host IP address Subnet mask Chain Rule of IP Filter Radius and Local Web-Server ConfigurationLocal Dynamic DNS User Host Radius ServerRADIUS-Server Configuration HTTPS/SSLSerial Ports ConfigurationPort Authentication Port Enable/Disable Port TitleConsole-Server Mode Operation ModesTCP Keep-Alive No Configuration Required Terminal-Server ModeListening TCP Port Number ProtocolSerial-Port Parameters Dial-in Modem ModeSerial-to-Serial Mode Port Logging Break Function ConnectionTelnet Java Applet Section Serial-to-Serial Function InstallationEnable and Configure Serial-to-Serial Section Serial Ports System Status and Log System Logging System Administration User AdministrationUser Name and Password Guidelines Add UserRemove User Edit the Access Control list ACL Change Password Date and Time NTPFirmware Upgrade Upgrade from the Web InterfaceSSL Certificate Secure Http Certificate System Administration Section System Administration Reset to Factory-Default Settings RebootEnabled Technical DataDefault Settings Server Name BelkinSC F1D121ea RJ45F-DB25F DTE DB25 Female DTE Adapter Appendix a AdaptersF1D120ea RJ45F-DB9F DTE DB9 Female DTE Adapter F1D122ea RJ45F-DB25M DCE DB25 Male DCE Adapter F1D123ea RJ45F-DB25M DTE DB25 Male DTE AdapterF1D124ea RJ45F-RJ45M Cisco RJ45 Male Adapter Appendix B Ethernet Pin-Outs RJ45 Standard Ethernet Cable RJ45 Pin-Out DescriptionAppendix C Well-Known TCP/UDP Port Numbers Port Number ProtocolAppendix D Protocol Glossary PAP Password Authentication Protocol Radius Remote Authentication Dial-In User ServiceTACACS+ Terminal Access Controller Access Control System NTP Network Time ProtocolAppendix E Creating CA Files Openssl req -new -key cakey.pem -out server.csr Information FCC StatementCE Declaration of Conformity What the period of coverage isHow to get service What will we do to correct problems?What is not covered by this warranty? How state law relates to the warranty Page Free Tech Support

F1DP116SEA specifications

The Belkin F1DP116SEA is an innovative solution designed to enhance the performance and capabilities of modern workspaces. As a cutting-edge KVM (Keyboard, Video, Mouse) switch, it allows users to control multiple computers from a single set of peripherals, streamlining productivity and simplifying workspace management.

One of the standout features of the F1DP116SEA is its ability to support dual display configurations. This capability is vital for professionals who rely on multiple monitors for increased efficiency and multitasking. By enabling seamless transitions between systems, users can easily manage tasks across different platforms without the need for additional cumbersome hardware.

The F1DP116SEA employs advanced video technology, supporting resolutions of up to 1920 x 1200 at 60Hz. This ensures crisp and clear visuals for all connected devices, making it ideal for tasks that require precise detail, such as graphic design or video editing. The switch supports both DVI and HDMI connections, providing versatility and adaptability to different setups.

Ease of use is another hallmark of the Belkin F1DP116SEA. Its plug-and-play design means that users can install and start operating the device without the need for extensive technical knowledge or additional software. This user-friendly approach minimizes downtime and promotes a smoother experience.

In addition to its functional benefits, the F1DP116SEA is designed with durability in mind. Constructed from high-quality materials, it can withstand the rigors of daily operation, making it a reliable choice for both home offices and corporate environments. The device is compact and lightweight, further enhancing its suitability for various workspace configurations.

The switch also features hotkey switching, allowing users to switch between computers using keyboard commands efficiently. This functionality eliminates the need for manual toggling and aids in maintaining a fluid workflow, especially in fast-paced environments.

Moreover, the Belkin F1DP116SEA addresses security concerns with its ability to isolate systems, ensuring that sensitive information remains protected during cross-system operations. This added layer of security is particularly beneficial in workplaces where data privacy is paramount.

In summary, the Belkin F1DP116SEA KVM switch stands out for its dual display support, high-resolution capabilities, durability, and user-friendly features. These characteristics combine to create a powerful tool that enhances productivity and streamlines the user experience in multi-computer environments.
Top Page Image Contents