Compatible Systems 2250R manual Basic Configuration Guide, Ethernet Interface Configuration

Page 25

Chapter 6 - Basic Configuration Guide

19

Chapter 6 - Basic Configuration Guide

This chapter briefly explains the major parameters that must be set in order to use the router.

Detailed information on the meaning of the router’s parameters is provided in the CompatiView Management Software Reference Guide and the Text-Based Configuration and Command Line Management Reference Guide. You should use this list as a starting point to look up more specific information in the other documents.

If you need more general information on IP , IPX, AppleTalk or wide area protocols, see the Appendices in the CompatiView Management Software Reference Guide.

There are a number of parameter settings which are optional, in the sense that they are not required for all installations. These settings are not covered in this chapter.

In this chapter:

CV = CompatiView

TB = Text-Based Configuration

In order to successfully connect to an Internet Service Provider (ISP), you must use router configuration parameters which will be provided by the technical staff of the ISP. These parameters must include all IP addresses, WAN settings, and any applicable authorization routines. Please check with your ISP before configuring or changing the configu- ration of your MicroRouter 2250R.

Note: This Basic Configuration Guide does not include information von setting up packet filters for using the router as a Firewall. See the CompatiView Management Software Reference Guide or Text-Based

Configuration and Command Line Management Reference Guide regarding IP packet filters for more information.

Ethernet Interface Configuration

Ethernet interfaces are considerably easier to set up than wide area interfaces since there are fewer choices that need to be made regarding communications protocols and parameters. We recommend that you begin by configuring any Ethernet interface parameters before proceeding to configure WAN interface parameters.

Image 25
Contents MicroRouter 2250R Installation Guide Page Introduction Network InstallationGetting Started Basic Configuration Guide Command Line ManagementIii Appendix a Shipping DefaultsWAN Interfaces Systems Appendix E Terms and ConditionsAbout the MicroRouter 2250R IntroductionIntroduction MicroRouter 2250R Installation Overview CompatiView Software Installation Network InstallationCommand Line Preparation Basic Configuration GuidePage Getting Started Warranty and ServiceFew Notes Please Read The ManualsWhat You Will Need To Get Started Needed For InstallationSupplied with the MicroRouter 2250R T1 Line Connection Requirements Ethernet Connection RequirementsOther Telco Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Placing the Router Network InstallationConnecting the Router to a T1 Line Connecting the Router to the EthernetConnecting a Line Device to the Secondary Port Connecting to Twisted-Pair EthernetPowering Up the Router Connecting an Out-of-Band Management ConsolePage CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Out-of-Band Command Line Management Command Line ManagementSetting Up Telnet Operation Temporarily Reconfiguring a Host for Command Line ManagementEthernet 0 section Page Ethernet Interface Configuration Basic Configuration GuideIPX Protocol IP ProtocolRequired for IP Suggested for IPDECnet Protocol AppleTalk ProtocolInternal T1 CSU/DSU WAN 0 Physical Communications Settings WAN Interface ConfigurationRS-232 WAN 1 Physical Communications Settings RS-232 WAN 1 Link Configuration Internal T1 CSU/DSU WAN 0 Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol DECnet Protocol Frame Relay Dlci Mappings Frame Relay ConfigurationRequired for IP Numbered Interface IPX Protocol AppleTalk Protocol Smds Addressing Saving a Configuration File to Flash ROMPage Default Password Appendix a Shipping DefaultsEthernet Interface WAN Interfaces Pin Outs for T1 Female Connector DTE Appendix B Connector and Cable Pin OutsPage Ethernet Traffic Indicators Ethernet LED Bar Power On, No TrafficWAN Indicators WAN LED Bar MicroRouter 2250R LED PatternsMicroRouter 2250R Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms and Conditions Appendix E Terms ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

2250R specifications

The Compatible Systems 2250R is a high-performance networking solution designed to meet the demands of modern data-driven enterprises. This robust system integrates advanced technologies to ensure seamless connectivity, enhanced security, and optimal performance in various networking environments.

One of the standout features of the 2250R is its ability to support multiple connectivity options, including Ethernet, Wi-Fi, and fiber optics. This versatile design allows for seamless integration into any existing infrastructure, enabling organizations to utilize their network resources efficiently. The device provides a flexible framework to expand or modify the network as needed, accommodating both current and future demands.

The 2250R is powered by a state-of-the-art processing engine that ensures rapid data processing and low-latency communications. With multi-threading capabilities and support for parallel data streams, users can expect high throughput and reliable performance even during peak traffic periods. This capability is particularly beneficial for applications such as cloud computing, video conferencing, and real-time data analysis, where any delay can lead to significant operational inefficiencies.

Security is also a primary consideration with the Compatible Systems 2250R. The device comes equipped with advanced security features, including firewall protection, intrusion detection/prevention systems, and VPN support. These functionalities enable organizations to safeguard their sensitive data from potential cyber threats while ensuring compliance with various regulatory standards.

In terms of scalability, the 2250R is designed to grow with the organization. It supports a wide range of modules and add-ons, allowing for customized configurations that address specific networking needs. This modularity ensures that the system can evolve alongside organizational growth and technological advancements, making it a future-proof investment.

Additionally, the user interface of the 2250R has been designed for ease of use. With an intuitive management portal, administrators can quickly monitor system performance, configure settings, and troubleshoot issues with minimal effort. This user-friendly approach significantly reduces the time required for network management and streamlines operational workflows.

Overall, the Compatible Systems 2250R is a reliable, flexible, and secure networking solution ideal for organizations looking to enhance their connectivity and data management capabilities in a competitive landscape. Its combination of advanced features, high performance, and scalability make it an excellent choice for businesses of all sizes.