Compatible Systems 2250R manual WAN Interface Configuration

Page 28

22

Chapter 6 - Basic Configuration Guide

 

 

Suggested for DECnet

Setting the parameters above should be adequate for most installations.

WAN Interface Configuration

In order to use a WAN interface, you may first need to set some phys- ical parameters and then set up the link and protocol parameters.

There are differences between the capabilities of the built-in T1 CSU/DSU WAN interface and the RS-232 WAN interface. The T1 interface can only be used with lines which run at fractional or full T1 rates. The RS-232 interface can be run synchronously or asynchro- nously, at rates up to 256Kbps (sync) or 230.4Kbps (async).

Internal T1 CSU/DSU (WAN 0) Physical Communications Settings

Required for Dedicated Line Operation

No changes from the default values are required for standard operation over a full T1. The default values are listed in Appendix A.

Suggested for Dedicated Line Operation

Changing to fractional T1, different coding or framing, etc., may be required for a particular installation.

CV: Use the Physical Configuration: WAN 0 Dialog Box.

TB: Use configure and the T1 Interface WAN 0 section.

RS-232 (WAN 1) Physical Communications Settings

You may need to set the baud rate, sync/async operation, and other physical communications parameters for the WAN interface. These parameters will depend on the line communications device you are using.

Note: Frame Relay is presently supported in the MicroRouter v2250R only via synchronous operation. An external clock signal is generated for Frame Relay.

CV: Use the Physical Configuration: WAN 1 Dialog Box.

TB: Use configure and set the LinkType keyword or other keywords in the RS232 Interface WAN 1 section.

Image 28
Contents MicroRouter 2250R Installation Guide Page Introduction Network InstallationGetting Started Command Line Management Basic Configuration GuideAppendix a Shipping Defaults IiiSystems Appendix E Terms and Conditions WAN InterfacesAbout the MicroRouter 2250R IntroductionIntroduction MicroRouter 2250R Installation Overview Network Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The ManualsWhat You Will Need To Get Started Needed For InstallationSupplied with the MicroRouter 2250R Ethernet Connection Requirements T1 Line Connection RequirementsOther Telco Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Network Installation Placing the RouterConnecting the Router to the Ethernet Connecting the Router to a T1 LineConnecting a Line Device to the Secondary Port Connecting to Twisted-Pair EthernetConnecting an Out-of-Band Management Console Powering Up the RouterPage CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementTemporarily Reconfiguring a Host for Command Line Management Setting Up Telnet OperationEthernet 0 section Page Basic Configuration Guide Ethernet Interface ConfigurationIP Protocol IPX ProtocolRequired for IP Suggested for IPAppleTalk Protocol DECnet ProtocolInternal T1 CSU/DSU WAN 0 Physical Communications Settings WAN Interface ConfigurationRS-232 WAN 1 Physical Communications Settings Internal T1 CSU/DSU WAN 0 Link Configuration RS-232 WAN 1 Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol DECnet Protocol Frame Relay Configuration Frame Relay Dlci MappingsRequired for IP Numbered Interface IPX Protocol AppleTalk Protocol Saving a Configuration File to Flash ROM Smds AddressingPage Default Password Appendix a Shipping DefaultsEthernet Interface WAN Interfaces Appendix B Connector and Cable Pin Outs Pin Outs for T1 Female Connector DTEPage Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarWAN Indicators WAN LED Bar MicroRouter 2250R LED PatternsMicroRouter 2250R Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

2250R specifications

The Compatible Systems 2250R is a high-performance networking solution designed to meet the demands of modern data-driven enterprises. This robust system integrates advanced technologies to ensure seamless connectivity, enhanced security, and optimal performance in various networking environments.

One of the standout features of the 2250R is its ability to support multiple connectivity options, including Ethernet, Wi-Fi, and fiber optics. This versatile design allows for seamless integration into any existing infrastructure, enabling organizations to utilize their network resources efficiently. The device provides a flexible framework to expand or modify the network as needed, accommodating both current and future demands.

The 2250R is powered by a state-of-the-art processing engine that ensures rapid data processing and low-latency communications. With multi-threading capabilities and support for parallel data streams, users can expect high throughput and reliable performance even during peak traffic periods. This capability is particularly beneficial for applications such as cloud computing, video conferencing, and real-time data analysis, where any delay can lead to significant operational inefficiencies.

Security is also a primary consideration with the Compatible Systems 2250R. The device comes equipped with advanced security features, including firewall protection, intrusion detection/prevention systems, and VPN support. These functionalities enable organizations to safeguard their sensitive data from potential cyber threats while ensuring compliance with various regulatory standards.

In terms of scalability, the 2250R is designed to grow with the organization. It supports a wide range of modules and add-ons, allowing for customized configurations that address specific networking needs. This modularity ensures that the system can evolve alongside organizational growth and technological advancements, making it a future-proof investment.

Additionally, the user interface of the 2250R has been designed for ease of use. With an intuitive management portal, administrators can quickly monitor system performance, configure settings, and troubleshoot issues with minimal effort. This user-friendly approach significantly reduces the time required for network management and streamlines operational workflows.

Overall, the Compatible Systems 2250R is a reliable, flexible, and secure networking solution ideal for organizations looking to enhance their connectivity and data management capabilities in a competitive landscape. Its combination of advanced features, high performance, and scalability make it an excellent choice for businesses of all sizes.