Compatible Systems 1200i manual Connecting the Router to the Ethernet

Page 16

10

Chapter 3 - Network Installation

Connecting the Router to the Ethernet

If your twisted-pair hub is already in place, you can connect the router to an active network without interrupting network activity. The router must be powered off.

Connecting to Twisted-Pair Ethernet

Before connecting the router to twisted-pair cabling you need an unshielded twisted-pair cable that is already connected to your 10BaseT-compatible twisted-pair hub.

To connect the router to the twisted-pair network, simply plug the twisted-pair cable into the RJ-45 Ethernet connector on the back of the unit.

Connecting a Line Device to the

MicroRouter 1200i

The MicroRouter 1200i supports high-speed synchronous operation over a V.35 connector. It also supports lower speed synchronous/asyn- chronous operation over an RS-232 connector.

The MicroRouter 1200i independently supports PPP, Frame Relay and SMDS link protocols on WAN 0 and PPP and Frame Relay on WAN 1.

Connecting Devices to the V.35 Interface

This interface -- WAN 0 -- can be used to connect to a wide variety of line communications devices, including those which support either leased or dialed operation. Examples include leased 56K CSU/DSUs, switched 56K CSU/DSUs, fractional T1 CSU/DSUs, ISDN Terminal Adapters, and full T1/E1 rate CSU/DSUs.

You may select either dial-on-demand, redial if down (“always up” mode), or leased line operation. This interface may also be set to receive ISDN or switched 56 incoming calls.

To connect a device, first make sure that both units are powered off. Then, simply connect a V.35 cable (not supplied) between the router and the device.

Image 16
Contents MicroRouter 1200i Installation Guide Compatible Systems Support Introduction Network InstallationGetting Started Basic Configuration Guide CompatiView Software InstallationAppendix a Shipping Defaults Appendix B Connector and Cable Pin Outs Systems Appendix E Terms and ConditionsAbout the MicroRouter IntroductionIntroduction MicroRouter 1200i Installation Overview Getting StartedIntroduction Network Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The ManualsNeeded For Installation What You Will Need To Get StartedSupplied with the MicroRouter Ethernet Connection RequirementsGetting Started 10Base-T Twisted-Pair Ethernet Telco Line Connection RequirementsInterface RS-232 Interface Network Installation Placing the RouterConnecting the Router to the Ethernet Connecting a Line Device to MicroRouterConnecting to Twisted-Pair Ethernet Connecting Devices to the V.35 InterfaceConnecting an Out-of-Band Management Console Connecting Devices to the RS-232C InterfacePowering Up the Router CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementSetting Up Telnet Operation Command Line ManagementCommand Line Management Page Basic Configuration Guide Ethernet Interface Configuration IP ProtocolRequired for IP Suggested for IPWAN Interface Configuration Physical Communications SettingsIPX Protocol Required for IPXLink Configuration Required for Dedicated/Leased Line OperationSuggested for Dedicated/Leased Line Operation Required for Dial-On-Demand OperationIP Protocol IPX Protocol Frame Relay Configuration Frame Relay Dlci MappingsRequired for IP Numbered Interface Required for IP Unnumbered InterfaceSmds Configuration Saving a Configuration File to Flash ROM Smds AddressingAppendix a Shipping Defaults Ethernet InterfaceIP Defaults IPX DefaultsWAN 0 Link & Physical Defaults RS-232 WAN 1 Link & Physical DefaultsAppendix B Connector and Cable Pin Outs Pin Outs for V.35 Female Connector DTEAppendix B Connector and Cable Pin Outs Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarOther Indicators on All LED Bars Panic IndicatorsMicroRouter 1200i Switch Settings Appendix C LED Patterns and Test Switch SettingsAppendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

1200i specifications

The Compatible Systems 1200i is an innovative and versatile platform designed to meet the increasing demands of modern computing environments. This system is known for its robust performance, reliability, and flexibility, making it an excellent choice for various applications, from business operations to personal use.

One of the standout features of the Compatible Systems 1200i is its powerful processing capabilities. It is equipped with a high-performance multi-core processor that provides efficient multitasking and enhanced speed for demanding applications. This allows users to run multiple applications concurrently without experiencing lag, making it ideal for professionals who require seamless operational efficiency.

In terms of memory, the 1200i boasts an expandable RAM capacity, enabling users to customize their systems according to their needs. The ability to upgrade RAM means that users can enhance their systems’ performance as requirements increase over time, thereby prolonging the system's lifespan and utility.

Storage is another critical aspect of the Compatible Systems 1200i. It offers a combination of SSD and HDD options, providing users with the benefits of fast data access speeds alongside ample storage capacity. The hybrid storage solution ensures that users have quick access to their operating system and frequently used applications, while still having the ability to store larger files and data sets.

The system’s design emphasizes connectivity, featuring multiple USB ports, HDMI outputs, and Ethernet options. This extensive range of connectivity allows users to easily connect peripheral devices, external monitors, and networks, facilitating an adaptable workspace setup. Additionally, wireless connectivity options, such as Wi-Fi and Bluetooth, enhance mobility and convenience for users who prefer to work remotely or in shared spaces.

On the software side, the Compatible Systems 1200i supports a wide array of operating systems, allowing users the flexibility to choose their preferred ecosystem. Whether utilizing Windows, Linux, or other platforms, users can tailor their experience to suit their specific workflows and applications.

Durability is another hallmark of the Compatible Systems 1200i. Built with high-quality materials, the system is designed to withstand the rigors of everyday use, ensuring longevity and reliability.

In summary, the Compatible Systems 1200i is a powerful and flexible computing solution that combines advanced technology with user-friendly features. Its high-performance processor, expandable memory, versatile storage options, extensive connectivity, and robust design make it a suitable choice for a wide range of users, from business professionals to casual users.