Compatible Systems 1200i manual Setting Up Telnet Operation, Command Line Management

Page 22

16

Chapter 5 - Command Line Management

 

 

interface. You can then do the following:

1.Set the host’s IP address to 198.41.12.2, with a Class C subnet mask (255.255.255.0) and then Telnet to 198.41.12.1.

2.Enter the default password letmein at the password prompt. The command line interface prompt will appear on the screen.

3.Use the configure command and set the IPAddress, SubnetMask, and IPBroadcast keywords in the IP Ethernet 0 section.

4.Use the save command to save the changes to the device’s Flash ROM.

5.Change the host’s configuration back to its original settings.

See the next section (Setting Up Telnet Operation) for information on setting the router to allow Telnet access from hosts on its network.

Setting Up Telnet Operation

Telnet is a remote terminal communications protocol based on TCP/IP. With Telnet you can log into and manage the MicroRouter 1200i from anywhere on your IP internetwork, including across the Internet if your security setup allows it. To manage the router with Telnet, you must:

1.Run Telnet client software on your local computer, which will com- municate with the Telnet server built into the MicroRouter 1200i.

2.You must also set some basic IP parameters in the router. The required parameters for Telnet access to an interface are the IP address, IP subnet mask, and IP broadcast address. There are sev- eral ways to set them.

•You may set them using text-based configuration either out-of-band via the Console interface or in-band via a recon- figured IP host. Instructions for setting up these two methods were given earlier in this chapter. Once you have set up the command line interface, do the following:

A.Use the configure command and set the IPAddress, SubnetMask, and IPBroadcast keywords in the IP Ethernet 0 section.

B.Use the save command to save the changes to the device’s Flash ROM.

•You may also use CompatiView from a reconfigured IP host (if using the IP transport protocol), or anywhere on your network (if using the IPX transport protocol). Instructions for these

Page 21 Page 23
Image 22
Page 21 Page 23
Contents MicroRouter 1200i Installation Guide Compatible Systems Support Introduction Network InstallationGetting Started Basic Configuration Guide CompatiView Software InstallationAppendix a Shipping Defaults Appendix B Connector and Cable Pin Outs Systems Appendix E Terms and ConditionsAbout the MicroRouter IntroductionIntroduction MicroRouter 1200i Installation Overview Getting StartedCommand Line Preparation Introduction Network InstallationCompatiView Software Installation Basic Configuration GuidePage Few Notes Warranty and ServiceGetting Started Please Read The ManualsSupplied with the MicroRouter Needed For InstallationWhat You Will Need To Get Started Ethernet Connection RequirementsGetting Started 10Base-T Twisted-Pair Ethernet Telco Line Connection RequirementsInterface RS-232 Interface Network Installation Placing the RouterConnecting to Twisted-Pair Ethernet Connecting the Router to the EthernetConnecting a Line Device to MicroRouter Connecting Devices to the V.35 InterfaceConnecting an Out-of-Band Management Console Connecting Devices to the RS-232C InterfacePowering Up the Router CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementSetting Up Telnet Operation Command Line ManagementCommand Line Management Page Basic Configuration Guide Required for IP Ethernet Interface ConfigurationIP Protocol Suggested for IPIPX Protocol WAN Interface ConfigurationPhysical Communications Settings Required for IPXSuggested for Dedicated/Leased Line Operation Link ConfigurationRequired for Dedicated/Leased Line Operation Required for Dial-On-Demand OperationIP Protocol IPX Protocol Frame Relay Configuration Frame Relay Dlci MappingsRequired for IP Numbered Interface Required for IP Unnumbered InterfaceSmds Configuration Saving a Configuration File to Flash ROM Smds AddressingAppendix a Shipping Defaults Ethernet InterfaceWAN 0 Link & Physical Defaults IP DefaultsIPX Defaults RS-232 WAN 1 Link & Physical DefaultsAppendix B Connector and Cable Pin Outs Pin Outs for V.35 Female Connector DTEAppendix B Connector and Cable Pin Outs Other Indicators on All LED Bars Power On, No TrafficEthernet Traffic Indicators Ethernet LED Bar Panic IndicatorsMicroRouter 1200i Switch Settings Appendix C LED Patterns and Test Switch SettingsAppendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

1200i specifications

The Compatible Systems 1200i is an innovative and versatile platform designed to meet the increasing demands of modern computing environments. This system is known for its robust performance, reliability, and flexibility, making it an excellent choice for various applications, from business operations to personal use.

One of the standout features of the Compatible Systems 1200i is its powerful processing capabilities. It is equipped with a high-performance multi-core processor that provides efficient multitasking and enhanced speed for demanding applications. This allows users to run multiple applications concurrently without experiencing lag, making it ideal for professionals who require seamless operational efficiency.

In terms of memory, the 1200i boasts an expandable RAM capacity, enabling users to customize their systems according to their needs. The ability to upgrade RAM means that users can enhance their systems’ performance as requirements increase over time, thereby prolonging the system's lifespan and utility.

Storage is another critical aspect of the Compatible Systems 1200i. It offers a combination of SSD and HDD options, providing users with the benefits of fast data access speeds alongside ample storage capacity. The hybrid storage solution ensures that users have quick access to their operating system and frequently used applications, while still having the ability to store larger files and data sets.

The system’s design emphasizes connectivity, featuring multiple USB ports, HDMI outputs, and Ethernet options. This extensive range of connectivity allows users to easily connect peripheral devices, external monitors, and networks, facilitating an adaptable workspace setup. Additionally, wireless connectivity options, such as Wi-Fi and Bluetooth, enhance mobility and convenience for users who prefer to work remotely or in shared spaces.

On the software side, the Compatible Systems 1200i supports a wide array of operating systems, allowing users the flexibility to choose their preferred ecosystem. Whether utilizing Windows, Linux, or other platforms, users can tailor their experience to suit their specific workflows and applications.

Durability is another hallmark of the Compatible Systems 1200i. Built with high-quality materials, the system is designed to withstand the rigors of everyday use, ensuring longevity and reliability.

In summary, the Compatible Systems 1200i is a powerful and flexible computing solution that combines advanced technology with user-friendly features. Its high-performance processor, expandable memory, versatile storage options, extensive connectivity, and robust design make it a suitable choice for a wide range of users, from business professionals to casual users.
Top Page Image Contents