Precautions / Safety Warnings

MULTI-TASKER

Please read this manual carefully before using your MT100-10220-Slot Multi-Tasker™ Enclosure. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT100-10220-Slot Multi-Tasker™ Enclosure and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

•Qualified ALTINEX service personnel, or their authorized representatives must perform all service.

1.2 INSTALLATION

•To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the MT100-102in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

•Handle your MT100-102carefully. Dropping or jarring can damage the unit. If the MT100-102is not used for an extended period, disconnect the power cord from the power outlet or turn off the main connection.

1.3 RACK-MOUNT INSTALLATION

•Use only ALTINEX supplied MB1003 rack- mount ears for mounting the MT100-102into a rack.

•The maximum operating ambient temperature is 35ºC (95ºF).

•When installing the MT100-102into a rack, distribute individual units evenly, otherwise hazardous conditions may be created by an uneven weight distribution. This will reduce heat build up and will prolong the life of the MT100-102.Power should be connected using provided 3-prong power cord only. Furthermore, make sure that the rack is properly grounded.

1.4 CLEANING

•Unplug the MT100-102power cord before cleaning.

•Clean surfaces with a dry cloth. Never use strong detergents or solvents such as, alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC NOTICE

•This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

•This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

•Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.