3Com 10031370-01 setup guide Table below describes commands under the Sort item

2-2 CHAPTER 2: WORKING WITH SECURITY

Sorting Security The Security Setup screen has a command bar at the top. This section will address Information some of the commands found in this area.

The table below describes commands under the Change item:

Table 2-1 Change Commands

Command Name	Description
Create New Group	Create a new group from the list of group types.
	By default, Security is installed with the following types of
	object groups:
	■	Attachments
	■	Cover Pages
	■	Folders
	■	Modems
	■	Phonebooks
	■	User Profiles
	■	Users
Connect to Server	This command will re-establish the link with the fax server.
	If Show connection is enabled, it is possible to connect to a
	different server by selecting from the list.
Add New User	The Add Users screen appears. Once the user name is
	entered, the User Properties screen appears.
Cost Centers	If using billing numbers for invoicing, this command will
	allow assignment of numbers.
Exit	Save all changes and close the Security Setup screen.

The table below describes commands under the Sort item:

Table 2-2 Sort Commands

Command Name	Description
By Users	Use this to view and edit permissions for all user groups and
	individual users in relation to the objects they are using.
By Objects	Use this to view and edit permissions for all managed object
	groups (for example, modem groups) and individual objects
	in relation to the user groups or individual users and how
	they use these objects.
	This is the default screen.

The table below describes commands under the Window item:

Table 2-3 Window Commands

Command Name	Description
Tile Vertically	When permissions are being changed, an new window is
	created next to the main screen.
Tile Horizontally	These two commands change the appearance of the screen
	to facilitate data manipulation by the administrator.