WatchGuard Technologies 480-2524-001 Design for Manufacturing and Environment Document Purpose

Page 2

Design for Manufacturing and Environment Document

1.0Purpose

This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycling of the major product components.

2.0Scope

This instruction applies to the following product family and family part numbers.

Product Family Name

Family part #’s (not necessarily inclusive)

Firebox V10

• Firebox V10; all revisions

 

 

WatchGuard Technologies.Doc #480-2524-001 Rev. A Page 2 of 10 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Firebox De-manufacturing Instructions Design for Manufacturing and Environment Document Purpose Instruction visual Disassemble display module Flex Circuit Disconnect Pcba Posts and Remove from Interconnect Pcba Interconnect Pcba Battery -coin cell0301-001- Manganese oxide / Lithium CR2032 Main Pcba Revised Section Reason ECO#
Top Page Image Contents