WatchGuard Technologies 480-2524-001 manual Disassemble display module

Page 4

Design for Manufacturing and Environment Document

Material removed (part Desc or P/N & material type)

Upper housing

0788-001- PC/ABS FR110

Instruction visual

Disengage press fit display from upper housing with fingers

Disconnect display module by lifting corner locks and pulling display flex circuit

3.3 –Disassemble display module

WatchGuard Technologies.Doc #480-2524-001 Rev. A Page 4 of 10 Authorization and Revision History for this document is available in the WatchGuard ECO system

Image 4

Contents Firebox De-manufacturing Instructions Design for Manufacturing and Environment Document Purpose Instruction visual Disassemble display module Flex Circuit Disconnect Pcba Posts and Remove from Interconnect Pcba Interconnect Pcba Battery -coin cell0301-001- Manganese oxide / Lithium CR2032 Main Pcba Revised Section Reason ECO#