Snom 4S manual Overview

Page 5

1Overview

1.

Network address translation (NAT) is a reality today. There have been many discussions about the evil and the good of this network topol- ogy and the replacement by IP version 6. However, operators and busi- ness want to offer VoIP services today and therefore must address the problem.

The snom 4S NAT Filter is a SIP session border controller (SBC). It enables non-NAT aware devices to operate in private networks. It also allows operating the data center in a private network. It takes care about translation of SIP messages with private network identities into identities that can be addressed from the data center. When necessary or explicitly required, it forwards media and changes the SDP attachments in the SIP messages accordingly.

The SBC offers recording capabilities (depending on the licens- ing). Through a separate management interface, operators can define numbers and patterns that are silently recorded. Users may explicitly re- quest the recording of a call by pressing a key on the phone; in this case the whole call will be recorded (even parts of the call before pressing the key). The filter records in a compressed format where only the voice part of the conversation is recorded in highly-compressed audio format (13.2 kBit/s). By using an appropriately configured web server, operators can manage very large numbers of calls and, for example, forward them per e-mail to users or authorities.

The SBC does not translate signaling, e.g., from SIP to H.323 or to MGCP. It is a semi-transparent SIP proxy that takes care only about known methods and leaves the rest unchanged. If all user agents are fully NAT-compliant or on public Internet, the filter can transparently be removed from the network without changing the call flows or functional- ity. Also, the filter does not interfere with unknown applications. This is a advantage over back-to-back user agents (B2BUA) that operate on the application level.

snom technology AG • 5

Image 5
Contents Snom 4S NAT Filter Admin Manual Snom 4S NAT Filter Version Table of Contents Snmp Overview Applications FeaturesSnom technology AG Overview NAT Filter and SIP ArchitectureNAT Symmetrical RTP Signalling SIPHow does NAT work? Classification of User Agents Media RTPRole of the NAT Filter Probing Media PathsNAT Optimizing the Media Path for SymmetricalRegistering SBC BehaviourRTP Relay Snom technology AG NAT Scaling and RedundancyDetecting the right NAT Filter STUN/ICE-Aware User Agents Requirements on User AgentsNon NAT-Aware User Agents Defining the Maximum Session Time Architecture Windows InstallationInstallation Snom technology AG Installation Snom technology AG Linux Rpm -ihv snomnatf-2.10.*.rpm Installation Port Binding LoggingStandard Port Random Port Logging System SettingsGeneral Outound Proxy Preparing RecoveryPort Budgets Media PortsMedia Relay Controlling RoutingMultiple 2xx Handling Maximum Packet Size ChallengingTrusted Addresses Removing Headers Silence SuppressionConnection Oriented Media Clir Addresses Codec ControlWeb Server Integration Register Timeouts Timeout SettingsCall Timeouts Security Settings Snom technology AG Outbound Proxy List Server Log System InformationTrace Call History Current Ports Memory Statistics Currently Handled UAConfiguration Web Server Integration Interface to the Web Server AuthenticationSnom technology AG Web Server Integration Registration Call Initiation Snom technology AG Call Termination Snom technology AG Web Server Integration Setup of the Tools Setup of the SBCOID Available OIDSnom technology AG Snmp Checklist for Installation Checklist for Installation Reader‘s Feedback Snom technology AG All rights reserved