Promise Technology vERSION 0.81 manual Task 5 Logging into WebPAM PROe, Regular Connection

Task 5: Logging into WebPAM PROe

Task 5: Logging into WebPAM PROe

To log into WebPAM PROe:

1.Launch your Browser.

2.In the Browser address field, type in the virtual IP address of the VTrak.

Use the virtual IP address you obtained in Step 4 (see page 9). Note that the IP address shown below is only an example. The IP address you type into your browser will be different.

Regular Connection

•WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . .http://

•Enter the VTrak’s IP address . . . . . . . . . . . . . . . . . . . 192.168.10.85 Together, your entry looks like this:

http://192.168.10.85

Secure Connection

•WebPAM PROe uses a secure HTTP connection . . . . . . . . . .https://

•Enter the VTrak’s IP address . . . . . . . . . . . . . . . . . . . 192.168.10.85 Together, your entry looks like this:

https://192.168.10.85

3.When the log-in screen (Figure 21) appears:

•Type administrator in the User Name field.

•Type password in the Password field.

•Click the Login button.

The User Name and Password are case sensitive.

11