Network Computing Devices GW-EN11H user manual Configuring the Ethernet Adapter, Info Tab

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual

4. Configuring the Ethernet Adapter

The Info Tab

(Connected with wireless LAN)

(NOT Connected with any wireless LAN)

SSID: displays current SSID this adapter uses.

If the adapter found no AP or any other ad-hoc device, then SSID will show “non-spec” . Please make sure that your wireless LAN is working properly under the effective reach range of the adapter

Channel: displays the channel that the adapter uses now.

BSSID: displays MAC address of the AP that the adapter is connecting with.

Transmission Rate: the transfer data rate that the adapter is using in wireless LAN

Link Quality (%): displays the wireless LAN connection integrity when connected to an AP.

MAC address: displays the unique serial number burned into the adapter that identifies itself from other Ethernet devices.

IP address: displays the adapter’s current IP address assigned by AP or router.

Firmware Revision: displays the adapter’s current firmware version

Results of the most recent scan: displays the recent scan over the wireless LAN, and information of the found and reachable APs will be listed

When you re-load the web page, the result will be updated once again.

18