Network Computing Devices GW-EN11H user manual Hardware Installation, Physical Details

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual

2.Hardware Installation

Physical Details

Rear Panel

INIT Button	LAN Connection
LAN Cable
Selection Switch	Power Input

INIT Button	“INIT” mean “Initiation”. While pressing the button, the adapter will
	reboot and ERASE current settings, and restore to factory default
	settings. The left indicator “DIAG” will be off and then begin
	blinking. Then this initiation action will be completed when the
	indicator “ DIAG” is always green instead of blinking.

LAN Cable

Selection Switch

XCrossover: the RJ-45 port Tx and Rx lines are reversed. Use this setting when you have a straight cable connected to PC. It is also the factory default setting.

IIStraight: the RJ-45 port Tx and Rx lines are normal. Use this setting when you have a crossover cable connected.

Power Input Please only use the power adapter supplied

LAN Connection Use standard RJ-45 Ethernet cable to connect your PC, or any Ethernet-ready device, such as printer server.

7