Network Computing Devices None manual Microsoft Networking Checklist

5.2 Microsoft Networking Checklist

In order to the Wireless USB Adapter can run properly, some network items must be presented in the Microsoft “ Network Neighborhood “ setup. To check and activate the network setup, right-click the “Network Neighborhood“ and select “Properties”. The following items should be presented in the network setup:

1.Wireless USB Adapter

2.IPX / SPX-compatible Protocol -> Wireless USB Adapter

3.NetBEUI -> Wireless USB Adapter

4.TCP / IP -> Wireless USB Adapter

5.File and printer sharing for Microsoft Networks.

6.Client for Microsoft Networks

If any of these items are missing, please follow the instructions below to install them properly: Set up the Network Protocols:

Click “ Add “ and select “ Protocol “ on Network “ Configuration “.

Click “ Add “ and then choose the network protocol. Select Microsoft as the manufacturer and “ NetBEUI “, “ TCP/IP “, and “ IPX/SPX-compatible “ for the network protocols. Then click “OK“.

Now your network protocol should be set. Please check if your network needs any special requirements to operate in your office environment.

23