Troubleshooting | Network Computing Devices None instruction

Chapter 5 Troubleshooting

If you encounter some problems installing the Wireless USB Adapter or you want to confirm whether your card is installed properly or not, refer to the procedure below after you have installed the card.

5.1 Check the Various Properties of the Card

To verify if the driver has been set in your computer properly, you can follow the procedures below.

Right -click “ My Computer “ and then select “ Properties “, then you will enter your system properties. Select the Device Manager and click the Network Adapter. You will find the Wireless USB Adapter if it is installed successfully.

If there is Question-mark (?) or Exclamation-mark (!) in yellow on your Wireless USB Adapter in previous picture (PC Card Properties & System Properties), please make sure you have inserted the right PC Card, the proper driver and utility have been installed as well. If you are not sure, follow the procedure below to reinstall (update) the driver.

a.Enter “System Properties” and click “Device Manager” on upper menu.

b.Click “Network Adapter” and choose Wireless USB Adapter

c.Select “Driver” on the upper menu of Wireless USB Adapter properties, and then click on “ Update Driver” button.

d.Follow the Update Device Driver Wizard to complete the driver installation.