Packard Bell T5 manual Hazardous Voltage, Avoid Electrostatic Discharge, Power Supply Unit

Page 4

Hazardous Voltage

There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)installation of optional hardware devices.

Avoid Electrostatic Discharge

Electrostatic electricity can easily damage circuit cards and integrated circuits (ICs). To reduce risk of damage, store them in protective packaging whenever they are not installed in your system.

Add-in cards can be extremely sensitive to ESD and always require careful handling. After removing the card from the computer, place the card flat on a grounded, static-free surface, component-side up. Use a conductive foam pad if available, but not the card wrapper. Do not slide the card over any surface.

Before you install or remove memory modules, video memory, disk drives, circuit cards or other devices, protect them from static electricity. To do so, make sure your computer’s power switch is OFF. Then, unplug the computer’s AC power cord. Before picking up the device you (un)install, you should wear an anti-static wrist wrap (available at electronic supply stores). Be sure to connect the wrist wrap to an unpainted metal portion of the computer chassis. As an alternative, you can dissipate electrostatic build-up by touching an unpainted metal portion of the computer chassis with one hand. Then touch the device you are (un)installing with the other hand, and maintain continuous contact with it until it is (un)installed in the computer.

Power Supply Unit

Under no circumstances should you attempt to disassemble the power supply. The power supply contains no user- serviceable parts. Inside the power supply are hazardous voltages that can cause serious personal injury. Always return a defective power supply to your dealer.

WARNING

Ensure that the computer is disconnected from its power source and from all telecommunications links, networks, or modem lines whenever the chassis cover is removed. Do not operate the computer with the cover removed.

AVERTISSEMENT

Assurez-vous que le système est débranché de son alimentation ainsi que de toutes les liaisons de télécommunication, des réseaux, et des lignes de modem avant d’enlever le capot. Ne pas utiliser le système quand le capot est enlevé.

WARNUNG

Das System darf weder an eine Stromquelle angeschlossen sein noch eine Verbindung mit einer Telekommunikationseinrichtung, einem Netzwerk oder einer Modem-Leitung haben, wenn die Gehäuseabdeckung entfernt wird. Nehmen Sie das System nicht ohne die Abdeckung in Betrieb.

ADVERTENCIA

Asegúrese de que cada vez que se quite la cubierta del chasis, el sistema haya sido desconectado de la red de alimentación y de todos lo enlaces de telecomunicaciones, de red y de líneas de módem. No ponga en funcionamiento el sistema mientras la cubierta esté quitada.

WAARSCHUWING

Zorg er voor dat alle verbindingen van en naar de computer (stroom, modem netwerk, etc) verbroken worden voordat de behuizing geopend wordt. Zet de computer nooit aan als de behuizing geopend is.

AVVERTENZA

Prima di rimuovere il coperchio del telaio, assicurarsi che il sistema sia scollegato dall’alimentazione, da tutti i collegamenti di comunicazione, reti o linee di modem. Non avviare il sistema senza aver prima messo a posto il coperchio

Packard Bell EasyNote T5 Disassembly Manual

Page 4

Image 4
Contents EasyNote T5 series Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the Battery Removing the Hard Disk DriveDisconnecting the hard disk drive Removing the MDC Modem ModuleRemoving the Keyboard Cover Removing the KeyboardRemoving the Optical drive & Heat plate Removing the screws holding the keyboardCarefully remove the heat plate from the base unit Removing the Wireless Module Removing the Memory ModuleDisconnecting the wireless antenna Removing Heat Sink & CPURemoving the LCD Module Removing the heat sinkRelease the screws at rear side of the unit as shown in Fig Removing the LCD Panel LCD hinge screws at the bottomAaaa Removing the Top Cover Removing the inverter board screwsFlip over the unit and remove the screws as shown in Fig Battery Compartment Removing the Touch PadTouch Pad Assembly Removing the DC/DC BoardRemoving the Main Board DC/DC BoardDisconnect the VGA connector from the base as shown in Fig DIP Switch Settings Dip Switch Description SeetingScrews Disclaimer Revision History

T5 specifications

The Packard Bell T5 is a versatile and stylish laptop designed to meet the needs of both casual users and professionals alike. It boasts a sleek design that combines aesthetics with functionality, making it an appealing choice for those who value portability without sacrificing performance.

One of the standout features of the Packard Bell T5 is its vibrant display. The laptop comes equipped with a Full HD screen that provides stunning visuals, perfect for watching movies, browsing photos, or working on graphic-intensive tasks. The anti-glare technology further enhances the viewing experience, ensuring that users can comfortably use the laptop in various lighting conditions, reducing eye strain during extended use.

Under the hood, the Packard Bell T5 is powered by the latest generation of Intel processors, ensuring smooth performance for everyday tasks and demanding applications. This processing power is complemented by a generous amount of RAM, enabling seamless multitasking and efficient operation of multiple applications simultaneously. Whether you are working on a document, streaming videos, or playing games, the T5 handles it all with ease.

Storage options on the Packard Bell T5 are designed to cater to diverse needs. With various configurations available, users can choose between traditional hard disk drives (HDD) for ample storage capacity and solid-state drives (SSD) for faster data access and boot times. This versatility ensures that individuals can find the model that best fits their storage needs.

Connectivity is another strength of the Packard Bell T5, featuring an array of ports including USB Type-C, USB 3.0, HDMI, and an SD card reader. This ensures that users can easily connect to peripheral devices and external displays, enhancing the laptop's usability in different scenarios, whether at work or at home.

The T5 also emphasizes audio quality, equipped with advanced sound technologies that provide rich and immersive audio experiences. This makes it a great choice for multimedia consumption, gaming, or even creating content.

Additionally, the battery life of the Packard Bell T5 is optimized to support a full day of productivity, allowing users to work or entertain themselves on the go without frequent recharging.

Overall, the Packard Bell T5 combines performance, style, and practicality, making it an excellent choice for anyone looking for a reliable laptop that can adapt to their lifestyle. Its blend of modern technologies and user-friendly design ensures it meets the diverse needs of today’s users.