Promise Technology SX4000 Lite quick start Install the FastTrak Card

Quick Start Guide

Step 3: Install the FastTrak Card

The FastTrak RAID Controller card fits into any available:

•33-MHz, 32-bit PCI slot (must be PCI 2.2 compliant)

•The 33-MHz, 32-bit portion of a 64-bit PCI slot

on the PC’s motherboard (see Figure 1 below).

1.Remove the cover of your system.

2.Remove the inside slot cover of an available 33-MHz, 32-bit PCI slot on the motherboard.

3.Install the FastTrak card into the open slot (see Figure 1 below). Secure the bracket to the system’s frame.

4.Attach your system case’s 2- or 4-pin LED cable to the LED connector on the FastTrak card (see Figures 2 and 3, below). Make sure that pin 1 on the connector is aligned with pin 1 of the cable.

5.Fasten the FastTrak card bracket to the system case (see below).

Figure 1. Insert the FastTrak card into an open PCI slot.

5