Unpack Your FastTrak Card | Promise Technology SX4000 Lite specs

Quick Start Guide

Step 1: Unpack Your FastTrak Card

When you receive the FastTrak SX4000 Lite, the package should contain the items listed below:

•FastTrak SX4000 Lite Controller Card

•Quick Start Guide

•FastTrak SX4000 Lite driver diskette

•Four Internal 18 inch (46 cm) Ultra ATA, 80-wire/40-pin hard drive cables

•Two Y-cable power splitters

•CD with Drivers, Promise Array Management (PAM) utility, PAM User Manual and FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual

If any of the items are missing or appear damaged, please contact your dealer or distributor immediately.

Note

The Promise card is a PCI Plug-n-Play (PnP) device. No changes are necessary in the motherboard CMOS/BIOS Setup for resources or drive types in most applications.

Warning

Before installing the adapter into an existing system, backup any important or useful data. Failure to follow this accepted PC practice could result in data loss.

Warning

The FastTrak card, like other parts of your system, is subject to damage by static electricity. Be sure that you’re properly grounded (Promise Technology recommends that you wear an anti-static strap or touch a grounded object) and that you unplug your system before installing FastTrak.