Promise Technology SX8300, SX4300 user manual Create a Logical Drive

Page 15

Chapter 2: Installation

3.Attach the Y-cable power splitters to each of the disk drives.

Create a Logical Drive

You will now use the onboard FastBuild BIOS utility to create a logical drive with the attached drives. Even if you plan to use the WebPAM software to manage your logical drive, you can still create your first logical drive using the FastBuild Utility, as described here.

For an explanation of the logical drive concepts, see Chapter 5 of this manual.

1.Boot your system. If this is the first time you have booted with the FastTrak card and drives installed, the Promise onboard BIOS will display the following screen (below).

2.Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).

9

Image 15

Contents SX4300, SX8300 Recommendations CopyrightTrademarks Important data protection informationMay cause undesired operation Radio Frequency Interference StatementPage Contents Support Troubleshooting & TipsAbout This Manual IntroductionProduct Overview XOR AccelerationHot-Swapping WebPAM Management Software Page Installation SX4300SX8300 Installing the FastTrak Card Jbod Installing the Disk DrivesLED Pins Create a Logical Drive Page Installation Page FastBuild Utility FastTrak BiosMain Menu View Drive Assignments Create a Logical Drive One Logical Drive Two Logical Drives FastBuild Utility View Drive Assignments, Split Disk Drives Delete Logical Drive Controller Configuration Logical Drive Problems Halt On ErrorSystem Resources Page RAID 0 and Jbod Page Installing Software Drivers Install Driver During New OS Installation Install Driver in an Existing SystemWindows Server Windows XP Confirm InstallationInstall Driver in an Existing System Windows Red Hat Linux 8.0, 9.0, EL 3.0, EL Install Driver During New OS Installation Single Processor Install Driver During New OS Installation Multi-ProcessorSuSE Linux 9.1, 9.2, ES Install Driver in an Existing System Introduction to RAID Adapter BiosConcepts About FastTrakRAID 0 Stripe interleaves data across multiple drives RAID 0 StripeRAID 1 Mirrors identical data to two drives RAID 1 MirrorRAID 5 Stripes all drives with data and parity information RAID 5 Block Striping with Distributed ParityAbout Dual Data Redundancy RAID 10 Mirror / StripeCH1 CH2 CH3 CH4 Jbod Single DriveAdvantages Disadvantages Choosing a RAID LevelJbod Initialization Fast Init Other Logical Drive FeaturesStripe Block Size Gigabyte BoundaryLogical Drive Expansion Cache SettingsAdd Lose RAID Level MigrationLevel Current Number Possible Number Drives From Increase Redundancy CapacityRanges of Disk Array Expansion Current LD Size Maximum LD Sector Size Expansion Size Page Motherboard Issues Troubleshooting & TipsDrive-Related Errors System Cmos IssuesDrive cannot be formed into an logical drive Operating System-Related IssuesPromise Windows driver does not appear in Device Manager Performance TipsFrequently Asked Questions Pre-Installation Speed, Device Types, Capacity, CablingSupport How can I change the resources that the FastTrak uses? Drive IssuesOther array configurations will not work for this purpose Post-Installation Installation Issues Capacity, BootingEurope, Africa, Middle East Technical Support ServicesContact Technical Support United StatesGermany ItalyTaiwan Limited Warranty Disclaimer of other warrantiesChina Your Responsibilities Return Product For Repair

Related manuals

Manual 70 pages 55.21 Kb