Promise Technology SX8300, SX4300 user manual View Drive Assignments

Page 21

Chapter 3: FastBuild™ Utility

View Drive Assignments

From the Main Menu screen, press 1 to see the View Drive Assignments screen (below).

This screen reports disk drive assigments and provides the following information:

Channel: ID – Shows the FastTrak Controller channel ID (SX4300, 1 through 4; SX8300, 1 through 8) to which a particular disk drive is attached.

Drive Model – Identifies the manufacturer, model, and model number (if applicable) of each disk drive.

Capacity (MB) – Reflects the capacity in MB (megabytes) of the disk drive.

Assignment – This field identifies the logical drive to which the disk drive belongs. In the example above, there is one logical drive composed of three disk drives. LD 1-2 means logical drive 1, disk drive 2.

Unassigned drives are labeled free and are considered hot spares to provide fault tolerance. Unassigned drives may also be used to create a new logical drive at any time.

Extent – An extent is a portion of the disk drive. The FastTrak SX Series controller allows you to split the capacity of a disk drives between two logical drives. The portion of a disk drive available to be used in a logical drive is called an extent. The extent, or sum of two extents, is slightly smaller than the total capacity of the disk drive.

See “View Drive Assignments, Split Disk Drives” on page 20 for an example of two extents for each disk drive.

15

Image 21
Contents SX4300, SX8300 Trademarks CopyrightImportant data protection information RecommendationsMay cause undesired operation Radio Frequency Interference StatementPage Contents Support Troubleshooting & TipsAbout This Manual IntroductionProduct Overview XOR AccelerationHot-Swapping WebPAM Management Software Page Installation SX4300SX8300 Installing the FastTrak Card Jbod Installing the Disk DrivesLED Pins Create a Logical Drive Page Installation Page FastBuild Utility FastTrak BiosMain Menu View Drive Assignments Create a Logical Drive One Logical Drive Two Logical Drives FastBuild Utility View Drive Assignments, Split Disk Drives Delete Logical Drive Controller Configuration Logical Drive Problems Halt On ErrorSystem Resources Page RAID 0 and Jbod Page Installing Software Drivers Install Driver During New OS Installation Install Driver in an Existing SystemWindows Server Windows XP Confirm InstallationInstall Driver in an Existing System Windows Red Hat Linux 8.0, 9.0, EL 3.0, EL Install Driver During New OS Installation Single Processor Install Driver During New OS Installation Multi-ProcessorSuSE Linux 9.1, 9.2, ES Install Driver in an Existing System Concepts Adapter BiosAbout FastTrak Introduction to RAIDRAID 0 Stripe interleaves data across multiple drives RAID 0 StripeRAID 1 Mirrors identical data to two drives RAID 1 MirrorRAID 5 Stripes all drives with data and parity information RAID 5 Block Striping with Distributed ParityAbout Dual Data Redundancy RAID 10 Mirror / StripeCH1 CH2 CH3 CH4 Jbod Single DriveAdvantages Disadvantages Choosing a RAID LevelJbod Stripe Block Size Other Logical Drive FeaturesGigabyte Boundary Initialization Fast InitLogical Drive Expansion Cache SettingsLevel Current Number Possible Number Drives RAID Level MigrationFrom Increase Redundancy Capacity Add LoseRanges of Disk Array Expansion Current LD Size Maximum LD Sector Size Expansion Size Page Motherboard Issues Troubleshooting & TipsDrive-Related Errors System Cmos IssuesDrive cannot be formed into an logical drive Operating System-Related IssuesPromise Windows driver does not appear in Device Manager Performance TipsFrequently Asked Questions Pre-Installation Speed, Device Types, Capacity, CablingSupport How can I change the resources that the FastTrak uses? Drive IssuesOther array configurations will not work for this purpose Post-Installation Installation Issues Capacity, BootingContact Technical Support Technical Support ServicesUnited States Europe, Africa, Middle EastGermany ItalyTaiwan Limited Warranty Disclaimer of other warrantiesChina Your Responsibilities Return Product For Repair
Related manuals
Manual 70 pages 55.21 Kb

SX8300, SX4300 specifications

Promise Technology has established itself as a leader in data storage solutions, particularly with its cutting-edge SX4300 and SX8300 series. These enterprise-grade solutions cater to businesses seeking high-performance, reliable, and scalable storage systems.

The Promise SX4300 and SX8300 are built around the M.2 NVMe interface, providing exceptional data transfer speeds and low latency, which are crucial for applications requiring rapid data access. Both models leverage PCIe Gen 3 technology, ensuring that they can handle the demands of modern workloads with ease, whether in cloud storage, media production, or enterprise databases.

One of the standout features of the SX4300 is its ability to support up to four NVMe M.2 SSDs. This configuration allows for impressive storage capacities ranging from 3.2TB to 12.8TB. It also includes advanced features like parity RAID for data redundancy, safeguarding against drive failures and ensuring data integrity. The SX4300 is particularly well-suited for users looking for a compact solution that does not compromise on performance.

In contrast, the SX8300 takes performance a step further with support for up to eight NVMe M.2 SSDs. This expansion allows for scalable storage solutions tailored to the evolving needs of growing enterprises. The SX8300 also implements advanced cooling technologies that prevent thermal throttling during intense operations, thus maintaining optimal performance across extended periods.

Both models support Promise Technology’s proprietary RAID management software which simplifies configuration and monitoring. Users can easily manage their storage environments, enhancing performance and monitoring the health of their drives in real time. Additionally, these devices are designed to be compatible with a wide range of operating systems, making them versatile solutions for various IT infrastructures.

Regarding connectivity, the SX4300 and SX8300 provide robust options, ensuring high availability for mission-critical applications. Their compact, rack-mounted design promotes effective space utilization in data centers, adhering to modern IT demands for efficiency.

In summary, Promise Technology's SX4300 and SX8300 series deliver exceptional performance, scalability, and reliability, making them ideal choices for enterprises looking to enhance their storage capabilities. With advanced RAID technology, immense storage capacity, and easy-to-use management software, these systems are positioned to meet the high demands of today’s data-intensive environments. Choosing between the SX4300 and SX8300 ultimately depends on the required capacity and scalability needs, but both models exemplify Promise Technology’s commitment to innovation in data storage solutions.