7.Configure your wireless settings to match that of your wireless network. First choose the Wireless Mode and type in the SSID of your wireless network.
Mode
For Mode, AD-HOC means the wireless network is composed of stations without access points. INFRASTRUCTURE mode means all data is being passed through a central access point.
SSID
The Service Set Identifier is used by stations to select the wireless network with which to communicate.
Configure Bridge via:
The SX-600 will only allow configuration from one network interface at a time. While both network interfaces (wired and wireless) are enabled to transmit and receive raw packets, only one interface can be active for configuration (HTTP, Telnet or SNMP) purposes at a time. The default interface is wired, but it can be changed to the wireless interface by clicking on Wireless Connection.
Once you have entered the correct wireless mode and SSID for your wireless network, click on Wireless Security. The other settings on this page don’t normally need to be changed.
