Page 5 of 12 |
3.Hardware Connections
The FieldServer is connected to the ControlNet Network with 75 ohm coaxial cable. If the ControlNet is not wired in redundant mode, ensure that all connectors are connected to the COM A port. A 75 ohm terminator must be placed at either end of the ControlNet Bus.
|
|
|
|
| |
| A | B |
|
|
|
75 O |
|
|
|
|
|
|
|
| To ControlNet Network |
| |
75 O network terminators |
|
|
| ||
|
|
|
| ||
|
|
| FIELDSERVER |
|
|
|
|
| CONTROLNET |
|
|
|
| CONNECTION DIAGRAM |
| ||
|
| BASE NAME: | DATE: 11/4/05 | ||
|
| FILE NAME: | BY: | MC | |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408)