Before You Begin | Maxtor 91008D7, 91152D8, 90845D6, 90648D5, 90720D5

INSTALLATION

1 Before You Begin

IMPORTANT – PLEASE READ !

Please read this Installation Sheet completely before installing the Maxtor hard drive. It gives general information for installing a Maxtor hard drive in a typical computer system. If you don’t understand the installation steps, have a qualified computer technician install the hard drive. DO NOT use any low-level formatting software on this drive.

Handling Precautions

H H

Allow the hard drive to reach room temperature BEFORE installing it in your computer system.

Hard drives are sensitive to electrostatic discharge (ESD) damage.

Handle the drive by its sides. DO NOT touch the printed circuit board assembly.

NEVER drop, jar, or bump the drive.

DON’T connect/disconnect any drive cables when the power is on.

Tools for Installation

The following tools are needed to complete the installation of your Maxtor hard drive:

◆A small (#2) Phillips head screw driver

◆Small needle-nose pliers or tweezers

◆Your computer user’s manual

◆For drive capacities 8.4 GB or less, a DOS 5.0 (or higher) or Windows 95 bootable system diskette

◆For drive capacities greater than 8.4 GB, a Windows 95 bootable system diskette

Capacity Barriers

Due to operating system limitations, DOS cannot access the full capacity of drives larger than 8.4 GB. The Microsoft Windows 95 operating system or equivalent (full installation), NOT a Windows 95 upgrade from DOS (Windows 3.1 or 3.11), is required to obtain the full capacity of any hard drive larger than 8.4 GB.

Protecting Your Existing Data

Have you backed up your hard disk?

Periodic backup of important data is always a good idea. Whenever your computer is on, there is the potential for losing data on your hard drive. This is especially true when running disk utilities or any software that directly manipulates your files. Maxtor recommends that you make a backup copy of the files on any existing hard drives. If required, this data may then be copied to the Maxtor hard drive after it has been installed in your computer. Refer to your computer user’s manual for detailed data backup instructions.

Capacity Calculations

Maxtor defines one megabyte as 106 or one million bytes (1,000,000) and one gigabyte as 109 or one billion bytes (1,000,000,000).

FDISK, CHKDSK, Windows, BIOS and hard drive manufacturers may show different capacity values for the hard drive as they use different methods and numbering systems to calculate hard drive capacities. The two most common numeric representations of the hard drive capacity are presented in the base 10 (decimal) and base 2 (binary) numbering systems.

The formula to calculate the capacity of a drive is: Cylinders * Heads * Sectors * 512

This is a decimal number representing the total number of bytes (characters) that can be stored on the hard drive. To convert this number to binary megabytes (MB) or gigabytes (GB), this value must be divided by the decimal value of a binary MB or GB. The decimal equivalent of 1 MB (220) is 1,048,576 and 1 GB (230) is 1,073,741,824.

Example for a 3.5 GB hard drive:

6,800 * 16 * 63 * 512 = 3,509,452,800 bytes or 3.5 GB using 106 or decimal values. The equivalent in binary MB is 3,509,452,800 / 1,048,576 = 3,346 MB.

The equivalent in binary GB is 3,509,452,800 / 1,073,741,824 = 3,268 GB.

4 – 15

91152D8, 90845D6, 90648D5, 90720D5, 90510D4 specifications

Maxtor, a prominent name in the storage device industry, has developed a series of hard disk drives that cater to various computing needs. Among their lineup, models like the 90720D5, 90648D5, 90840D6, 91152D8, and 90432D3 stand out due to their distinctive features, technologies, and characteristics, making them suitable for both everyday computing and intensive data storage tasks.

The Maxtor 90720D5 is revered for its exceptional storage capacity of 72 GB, providing ample space for users to store a wide variety of files, from documents to multimedia content. This model operates with a spindle speed of 5400 RPM, allowing for a good balance between performance and power consumption, making it ideal for desktop and general-purpose usage.

Moving on to the Maxtor 90648D5, this model boasts a similar spindle speed but offers a larger capacity of 64 GB. With its advanced data integrity features, the 90648D5 utilizes error correction codes to ensure the reliable storage of important files, thus minimizing the risks of data loss.

The Maxtor 90840D6 represents a significant upgrade in terms of performance and capacity. With a storage capability of 80 GB, this drive is designed for users who require more space along with improved read and write speeds. The 90840D6 employs a sophisticated read/write head technology that enhances data retrieval times, ultimately improving overall system responsiveness.

The Maxtor 91152D8 further pushes the boundaries with a sizable 115 GB storage capacity. This model is well-equipped for handling large files, making it a preferred choice for video editing and other data-intensive applications. Additionally, it integrates advanced thermal management technologies to ensure optimal operating temperatures, thus enhancing longevity and reliability.

Finally, the Maxtor 90432D3 serves as a versatile option with a capacity of 43 GB. Recognizing the growing need for efficient storage solutions, this model focuses on providing users with a balance of performance and affordability, appealing to budget-conscious consumers without sacrificing quality.

In summary, the Maxtor 90720D5, 90648D5, 90840D6, 91152D8, and 90432D3 present a comprehensive range of hard disk drives that cater to diverse user requirements. Each model features unique capacities and advanced technologies, ensuring an efficient storage solution that adequately supports both casual users and professionals.