Maxtor 90720D5, 91152D8, 90845D6, 90648D5 System Setup, Setting the Bios Cmos, Bios Cmos Parameters

Page 25

INSTALLATION

7 System Setup

The following procedures are designed for systems using the DOS 5.0 (or higher) or Windows 95 operating systems. For other operating systems

(e.g., Windows NT®, OS2®, UNIX®, LINUX and Novell NetWare®), refer to the operating system user’s manual for the BIOS setting and other installation requirements.

IMPORTANT: For drives with capacities larger than 8.4 GB the full installation set for Window 95a or 95b (OSR2) or equivalent is required. Operating systems that do not support extended interrupt 13 cannot access or format a drive larger than 8.4 GB. This is true regardless of BIOS, mother board or interface card support. DOS based operating systems do not support this interrupt and are limited to a maximum drive size that they can format and access of 8.4 GB. It is not possible to upgrade from a DOS operating system to Windows 95 or equivalent and obtain the full capacity of a drive larger than 8.4 GB.

Setting the BIOS (CMOS)

The SETUP (BIOS) program identifies the system configuration information (e.g., floppy disk drives, hard disk drives, video, etc.) used to identify devices attached to the computer during system boot. This includes the information about what kind and how many hard drives are attached to the system.

IMPORTANT- Please Note: Major BIOS manufacturers like AMI, Award and Phoenix provide their core BIOS programs to system board manufacturers and OEM’s who have the capability of making modifications to some of the descriptions and definitions to meet their unique requirements. These changes include, but are not limited to, how to access the BIOS, the appearance of the information on the screens and the location of parameters within the BIOS. If you are unsure how to access the system BIOS refer to the system or BIOS manufacturers documentation or contact the system manufacturer for the correct procedure to enter the BIOS setup program for your system.

System manufacturers like Compaq, IBM, AST etc., may use their own unique proprietary BIOS definitions and configurations and will have their own unique methods of accessing and setting their BIOS. If you have a system that utilizes such an unique BIOS refer to the system user’s manual or contact the manufacturer for assistance in accessing and setting the BIOS.

WARNING: When entering the settings for the new Maxtor hard drive, be careful not to change any of the other BIOS settings, or other parts of the system may not work correctly.

BIOS (CMOS) Parameters

In order for the computer system to recognize the new Maxtor hard drive, it is necessary to set the system BIOS with the correct information about the hard drive. To do this, run the system SETUP (BIOS) program. The Maxtor hard drive must be identified to the system through the BIOS and it must be registered in the BIOS based upon its position relative to the other IDE devices connected to the system and recorded in the BIOS.

Most newer BIOS’ provide the descriptions of Primary Master, Primary Slave, Secondary Master and Secondary Slave (see section 2) which identify the device configuration and location on an IDE interface and its relationship to the other IDE devices on the same interface or ribbon cable.

Some older BIOS versions do not use this terminology for identification and it may be necessary to refer to the system user’s manual or BIOS documentation to determine where the drive settings should be set in that specific BIOS. If this information is not available, then it will be necessary to contact the system manufacturer for the correct terminology to correctly identify the drives within the system.

The following are the typical steps to be used to set the hard drive parameters in a BIOS:

ATurn the system ON. During the system start-up sequence, run the SETUP (BIOS) program or similar commands to access the system BIOS. Note: Newer systems will typically display a message (e.g., press DEL to Enter Setup) identifying how to access the SETUP (BIOS) program.

BOnce the SETUP (BIOS) program is active, do one of the following to set the BIOS parameters for the Maxtor hard drive.

1Enter the BIOS menu where the hard drive definitions are displayed, select the correct entry (Primary Master, Primary Slave, Secondary Master or Secondary Slave or their equivalents) to set the parameters for the Maxtor hard drive.

If the SETUP program provides an “AUTO DETECT” capability, use this feature to detect the Maxtor hard drive. If the SETUP program does not have AUTO DETECT, set the drive parameters as defined in 2 below. Typically, this feature is available for each individual IDE device. It may be necessary to exit the BIOS, re-boot the system and re-enter the BIOS before the AUTO DETECT operation will take effect.

IMPORTANT After the SETUP program has detected the hard drive, verify that the Logical Block Addressing (LBA) mode is enabled for the drive - as not all BIOS versions set this feature during the AUTO DETECT process.

4 – 20

Page 24 Page 26
Image 25
Page 24 Page 26
Contents DiamondMax Revisions Manual No U T I O N Before You BeginMaxtor Corporation IntroductionManual Organization AbbreviationsConventions Signal ConventionsKey Words NumberingProduct Description DiamondMax 2880 Key FeaturesFunctional / Interface Product FeaturesLogical Block Addressing On-the-Fly Hardware Error Correction Code ECCDefect Management Zone DMZ Software ECC CorrectionCache Management Read-Ahead ModeBuffer Segmentation Automatic Write Reallocation AWRMajor HDA Components Jumper Location/Configuration Subsystem ConfigurationCylinder Limitation Dual Drive SupportDrive Configuration Product SpecificationsPerformance Specifications Models and CapacitiesPhysical Dimensions Power Mode Definitions Power Requirements AverageEPA Energy Star Compliance Environmental LimitsShock and Vibration Reliability SpecificationsStandard Test Methods Safety Regulatory ComplianceHard Drive Handling Precautions Handling and InstallationPre-formatted Drive Important NoticeMulti-pack Shipping Container Unpacking and InspectionRecommended Mounting Configuration Physical InstallationRepacking Before You Begin Bios Requirements Hardware, Software and Bios RequirementsUltra Direct Memory Access Udma System Hardware RequirementsHard Drive Identification Jumper SettingsIdentifying IDE Devices on the Interface Primary/Master/Slave DefinitionsInstalling 5.25-inch Mounting Brackets and Rails Systems Using Cable SelectMounting Drive in System Attaching System Cables Attaching Interface Power CablesSetting the Bios Cmos System SetupBios Cmos Parameters Installation System/Drive Information Hard Drive PreparationSystem Hangs During Boot How to Obtain MaxBlast Software

91152D8, 90845D6, 90648D5, 90720D5, 90510D4 specifications

Maxtor, a prominent name in the storage device industry, has developed a series of hard disk drives that cater to various computing needs. Among their lineup, models like the 90720D5, 90648D5, 90840D6, 91152D8, and 90432D3 stand out due to their distinctive features, technologies, and characteristics, making them suitable for both everyday computing and intensive data storage tasks.

The Maxtor 90720D5 is revered for its exceptional storage capacity of 72 GB, providing ample space for users to store a wide variety of files, from documents to multimedia content. This model operates with a spindle speed of 5400 RPM, allowing for a good balance between performance and power consumption, making it ideal for desktop and general-purpose usage.

Moving on to the Maxtor 90648D5, this model boasts a similar spindle speed but offers a larger capacity of 64 GB. With its advanced data integrity features, the 90648D5 utilizes error correction codes to ensure the reliable storage of important files, thus minimizing the risks of data loss.

The Maxtor 90840D6 represents a significant upgrade in terms of performance and capacity. With a storage capability of 80 GB, this drive is designed for users who require more space along with improved read and write speeds. The 90840D6 employs a sophisticated read/write head technology that enhances data retrieval times, ultimately improving overall system responsiveness.

The Maxtor 91152D8 further pushes the boundaries with a sizable 115 GB storage capacity. This model is well-equipped for handling large files, making it a preferred choice for video editing and other data-intensive applications. Additionally, it integrates advanced thermal management technologies to ensure optimal operating temperatures, thus enhancing longevity and reliability.

Finally, the Maxtor 90432D3 serves as a versatile option with a capacity of 43 GB. Recognizing the growing need for efficient storage solutions, this model focuses on providing users with a balance of performance and affordability, appealing to budget-conscious consumers without sacrificing quality.

In summary, the Maxtor 90720D5, 90648D5, 90840D6, 91152D8, and 90432D3 present a comprehensive range of hard disk drives that cater to diverse user requirements. Each model features unique capacities and advanced technologies, ensuring an efficient storage solution that adequately supports both casual users and professionals.
Top Page Image Contents