Maxtor 20255400 manual Style A1 Style A2 Style B

In a master/slave setup, the boot drive should be configured as master and connected to the black connector at the end of the ATA cable. If you are attaching a second drive to the same ATA cable, it should be configured as slave and plugged into the gray connector.

	Style A1				Style A2		Style B
		(Includes				(Includes	(Includes DiamondMax
DiamondMax 16)				DiamondMax Plus 9)			Plus 8 and Fireball 3)
			Master				Master
			Slave				Slave
			Cable				Cable
			Select				Select

Figure 6

Jumper Block Positions

2

Installing the Hard Drive 7