Maxtor 20255400 manual Installing the Hard Drive

Page 13

tighten the screws as this will strip the threads in the drive's housing.

2.Mount the hard drive in the 5.25-inch bay using the screws provided with the mounting brackets. Mount the hard drive as close to the bottom of the device bay as possible with the label facing up.

3.Once you have attached the brackets to the hard drive, mount the hard drive in the 5.25-inch bay using the screws provided with the mounting brackets. Mount the hard drive as close to the bottom of the device bay as possible with the label facing up.

2

Installing the Hard Drive

9

Image 13

Contents Installation Guide FCC Declaration of Conformance Contents Part Number P/N Serial Number S/N Warranty Registration InformationHandling the Hard Drive Getting StartedImportant Notice for Drives Larger than 137 GB Installing the Drive with an Ultra ATA PCI CardBack Up Your Data Installing the Drive in a Macintosh Intentionally blank Removing the System Cover Installing the Hard DriveSetting the Jumper Style A1 Style A2 Style B Mounting the Hard Drive Inch Device Bay InstallationInstalling the Hard Drive Attaching the Cables Typical ATA Device Conﬁgurations New System or Failed Boot DriveExisting System with Two Atapi CD/DVD/Zip Drives Existing System with Single Atapi CD/DVD/Zip DriveConfiguring the System Bios Pause/Break Key on a Keyboard Formatting the Hard Drive Select your installation scenarioInstalling a New Boot Drive Windows 98, Me No OS found Installing a New Boot Drive Windows 2000, XP Ntldr is missing Press Ctrl+Alt+Del to restart Formatting the Hard Drive Unplug the ATA cable from both the new and old drives Ultra ATA/133 PCI Card Solutions Using a Drive Larger than 137 GBOperating System Solutions Formatting the Hard Drive Chipset Solutions for Windows 98SE, Me, 2000 and XP Getting Help Product Support Warranty ServicesSoftware Downloads Knowledge Base