Pitney Bowes N300 installation instructions Enter your location code, Press the Certified key

10 Plug power cord into outlet.	Result: The scale powers up and displays
	the LC (location code) prompt below.
	Go to Step 11 to continue.

Note: If the scale does not power-up, check that the power cord is firmly attached. Also check that the wall outlet you are using has power by plugging in another device.

11 Enter your location code.

Note: Your scale will not work unless you perform this step.

a.Find the number corresponding to your state in the chart at right.

b.At the LC prompt, press the Zero key to display the first code. Continue pressing Zero to advance to your state's code.

c.Ensure that the code on the display matches your state's code.

d.Press the Certified key.

The scale displays 0 lb 0.0 oz and the Select Class arrow flashes. This is the

ready mode.

Location Codes

State	Code	State	Code	State	Code
Alabama	50	Louisiana	50	Ohio	72
Alaska	06	Maine	72	Oklahoma	61
Arizona	50	Maryland	72	Oregon	72
Arkansas	61	Massachusetts	72	Pennsylvania	72
California	61	Michigan	72	Rhode Island	72
Colorado	61	Minnesota	84	South Carolina	50
Connecticut	72	Mississippi	50	South Dakota	72
Delaware	72	Missouri	61	Tennessee	61
Florida	50	Montana	84	Texas	50
Georgia	50	Nebraska	72	Utah	61
Hawaii	43	Nevada	61	Vermont	72
Idaho	72	New Hampshire	72	Virginia	61
Illinois	72	New Jersey	72	Washington, DC	72
Indiana	72	New Mexico	50	Washington	84
Iowa	72	New York	72	West Virginia	61
Kansas	61	North Carolina	61	Wisconsin	72
Kentucky	61	North Dakota	84	Wyoming	72

3