Soehnle 9222 manual Setting Target Weights Quantities, Sum Total, Compensating fluctuating weights

Page 9

Remove the reference pieces from the platform and wait briefly until the scales have calculated the unit weight.

Other amounts placed on the scales will now also be counted.

Compensating fluctuating weights

Place other reference pieces on the scales. Press to calculate the exact unit weight.

Counting with a known unit weight

x1

• Enter the known unit weight in

 

 

grams.

 

within 4 seconds, other-

 

• Press

x1

wise the input will be deleted auto- matically.

Other amounts placed on the scales will now also be counted.

Setting Target Weights /

Quantities

ALARM

A top and bottom limit can be set for

weight or counted readings.

 

 

• Press

ALARM

.

 

 

"PCS. Hi" is displayed.

Enter the maximum unit total.

Press ALARM .

"PCS. Lo" is displayed.

Enter the minimum unit total.

Press ALARM .

"LoAd. Hi" is displayed.

Enter upper target weight.

Press ALARM .

"LoAd. Lo" is displayed.

Enter lower target weight.

Press

ALARM

.

 

If the limits are exceeded a signal sounds and the

warning arrow flashes on

or

 

.

Removing the limits

 

 

 

Select the target levels and delete with

C

.

 

Sum Total

Calculate the unit weight as

ADD described in "Counting".

Place the goods on the scales and

wait until

appears.

• Press

ADD

and empty the scales.

 

 

Place more goods on the scales and

wait until

appears.

• Press

ADD

again and empty the

 

 

scales...

The number of added readings is shown on the left. Up to 180 readings can be stored.

Attention

Changing the PLU deletes the sum total memory.

The same unit totals cannot be added one after another as the scales will assume that the plat- form has not been cleared beforehand. A warn-

ing sounds.

9

Image 9
Contents Counting Scale Index Using the Scales for the First TimeGeneral Information Input and ControlSafety Notices CleaningMaintenance and Service ApplicationSpecifications Warranty/LiabilityDisposal Soehnle Professional GmbH & Co. KGSupplied Contents Using the Scales for the First TimeSwitching on/off Assembling the ScalesControl Keys Input and ControlDisplay Display SymbolsCalculating / Deducting Tare Weight Zero settingWeighing and Counting CountingCompensating fluctuating weights Setting Target Weights QuantitiesCounting with a known unit weight Sum TotalProgramming the PLUs With Tare Weight Saving PLU Product Look UpSelecting PLUs Programming the Tare Weight As Standard Error MessagesUser Calibration Manfred-von-Ardenne-Allee DE-71522 Backnang Phone +49 Fax Scales, System Solutions And Special Developments