On the Endurance Network Setup page make sure that the desired adapter is still highlighted and select Use currently configured IP addressing. Click Next to continue.
5.If your network configuration will not use CoServer Link 2, select No Coserver Link 2 and then click Next without selecting an adapter.
If you will be using CoServer Link 2, then on the Configure CoServer Link2 page, highlight the adapter you wish to assign as CoServer Link2 in the Connection column. Select the adapter based upon the PCI loca-
Right click on the selection and choose Internet Protocol Properties from the action menu. On the Internet Protocol Properties page select Use the following IP address,
On the Endurance Network Setup page make sure that the desired adapter is still highlighted and select Use currently configured IP addressing. Click Next to continue.
6.If your network will not use a CoServer Management connection, push Next without highlighting an adapter
If you will be using CoServer Management, then on the Configure CoS- erver Management page, highlight the adapter you wish to assign for CoServer Management in the Connection column. Select the adapter based upon the PCI
If you wish to assign an IP address, right click on the selection and choose Internet Protocol Properties from the action menu. On the Internet Protocol Properties page select Use the following IP address,
7.On the Endurance Network Setup page if the Update Network Con- nections adapter names box is checked, when you restart the system Network Setup will reassign the adapter names. Click Apply.
8.Click Exit.
Marathon Technologies Corporation | 31 |