Abit G740B Reconnect all cables & replace the cover, Start the computer and install the drivers

Page 12

2-4

Chapter 2

Step 5 - Reconnect all cables & replace the cover.

Plug the cable from your computer monitor into the back of the G740A/G740A Graphics Accelerator card. Make sure it is securely fastened.

If you have cables for television input and output, S-video (video camera) input and output, or a DVD add-on card, reconnect them to the card or via the provided multi-function cable.

Carefully replace the computer cover and plug the power cord back in.

Step 6 - Start the computer and install the drivers.

Turn the computer on and allow the operating system to start. Microsoft® Windows should auto-detect the presence of the new graphics card and prompt you to install the display drivers for it.

For Windows® 95 & 98:

Insert the driver disc into your CD-ROM drive, and you will see the main screen as below:

Page 11 Page 13
Image 12
Page 11 Page 13
Contents G740A/G740B Graphics Accelerator Card Page Table of Contents Page What’ s in the box? Software and Supporting DocumentationAbout the G740A/G740B Graphics Accelerator Card Full Hardware Acceleration of Key 3D Features Excellent 2D and Video PerformanceLayout diagram Chapter Installation Guide System RecommendationsGround yourself Unplug the computer and remove the coverRemove the current graphics card Insert the G740A/G740B Graphics Accelerator card Start the computer and install the drivers Reconnect all cables & replace the coverInstallation Chapter Page Page Troubleshooting Guidelines Gathering InformationSymptom Table Solution TableTroubleshooting and Support Technical SupportChapter Mechanical / Thermal Specifications Display InformationDDC Monitor Support Connector Descriptions CON4 15Pin VGA ConnectorVMI Feature Connectors
Top Page Image Contents