2.6.2 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA device by a thin SATA cable.
The RAID 0/1/0+1/5/JBOD configuration is also possible through the combination of disk arrays through these SATA connectors:
To connect SATA device:
1.Attach either end of the signal cable to the SATA connector on motherboard. Attach the other end to SATA device.
2.Attach the SATA power cable to the SATA device and connect the other end from the power supply.
The motherboard in this illustration is served for demonstration only, may not be the same type or model as the one described in this user’s manual.