Initio INI-9090U manual External cable connection

Page 14

10

Hardware Installation

FIGURE 5 – External cable connection

5Drive activity LED

A drive activity LED is designed into the host adapter to indicate when a data transfer is being made. Connection to the LED is optional and cabling is not included with this kit. Each host adapter has one four-pin connector. Please refer to the host adapter’s illustration (FIGURE 1) for the LED connector that will accomodate the LED cable.

6Multiple Initiators

Under some circumstances multiple initiators can be used on a single SCSI bus. The bus is configured to have more than one host adapter inserted into at least two distinctly different computer systems sharing peripheral devices. In these circum- stances, it is possible to have one of the two computer systems turned off. Under these conditions, the host adapter has a jumper that can be enabled (closed) to set the active on-board termination on all the time, regardless of whether power is applied or not. The host adapter is shipped without the jumper installed and need not be changed in most cases.

7Close the cover on the host computer

Visually inspect the configuration you have installed to verify that all cables have been inserted correctly. Close the cover on the host computer. The hardware installation for the host adapter is now complete.

initio®

Page 13 Page 15
Image 14
Page 13 Page 15
Contents INI-9090U D140-01 June First Edition Contents Linux Driver Installation Introduction Initio INI-9090U HostAdapterTechnical Illustration INI-9090U Board LayoutProduct Features/Specifications Product FeaturesProduct Specifications Scsi bus preparation Getting StartedHostAdapter and the Scsi Bus Scsi bus terminationGetting Started OFFInstallation inTen Easy Steps Hardware InstallationInstallation Basics OhighwayInserting the host adapter into a PCI slot Connecting the 50-pin internal flat ribbon cable External cable connection Hardware Installation Initio Host Adapter Setup Device Setup Data can be Lost by Changing SettingsAdapter Setup Bios SetupInitio Overview MS-DOS/Windows 3.1x Driver InstallationInstallation MS-DOS/Windows 3.1x Driver Installation Aspi Manager Command Line Options Aspi CD-ROM Driver Command Line OptionsSample CONFIG.SYS and AUTOEXEC.BAT Files Autoexec.batAspi Disk Driver Command Line Options Sample CONFIG.SYS Aspi Partition & Format UtilityMicrosoft Windows 95/95b OSR2 Driver Installation New Windows 95/95a InstallationMicrosoft Windows 95/95b OSR2 Driver Installation Control PanelMicrosoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95/95a Device Driver New Windows 95B OSR2 Installation Microsoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95B OSR2 Device Driver Initio Microsoft Windows NT Driver Installation NewWindows NT InstallationRemove diskette in drive a and set it aside Control Panel Installing a newWindows NT system from a Bootable CD Novell NetWare Driver Installation New IntraNetWare InstallationPCI.XXXX.XXXX.XXXX.XXXX.XX Novell NetWare Driver InstallationAdding the Initio driver to an existing IntraNetWare system Upgrading/Changing Driver on an Existing IntraNetWare Server Device driver command line options Driver Config OptionsIBM OS/2 Driver Installation New OS/2 installationAdding the Initio driver to an existing OS/2 system Device driver command line options Initio 10Overview SCO Unix Driver InstallationUpdating interrupts and hardware settings Enter Installing the Initio driver in a new SCO Unix systemAdding the Initio driver to an existing SCO Unix system Changing to the INI-9XXX as the bootable host adapter Initio 11Overview SCO UnixWare Driver InstallationInstalling the Initio driver in a new UnixWare system Adding the Initio driver to an existing UnixWare system Using Multiple Host Adapters Removing the Initio driver from a UnixWare systemSCO UnixWare Driver Installation Linux Drivers 12OverviewInitio Troubleshooting DOS Space 1GB MS-DOS, OS/2 &Windows NTDrives with Multiple Operating Systems Initio Index Update Driver OEMSETUP.INFSETUP.EXE SYSTEM.INI TXTSETUP.OEM Windows NT Workstation SetupProduct Warranty FCC Compliance StatementDeclaration of the Manufacturer/Importer EN 55 9100UW2 Declaration of Conformance

INI-9090U specifications

The Initio INI-9090U is a versatile and robust controller designed to cater to the ever-evolving demands of modern storage solutions. As a high-performance USB to IDE and SATA interface controller, it stands out for its ability to bridge older technologies with contemporary data transfer requirements. This integration is particularly significant in environments where legacy systems must interface seamlessly with newer data transfer protocols.

One of the main features of the INI-9090U is its support for both IDE and SATA interfaces. This dual compatibility ensures that users can connect a wide variety of storage devices, ranging from traditional hard drives to solid-state drives, facilitating easy upgrades and maintenance of storage systems. This flexibility is particularly beneficial for businesses that rely on diverse data storage solutions and need to maintain effective operational capabilities.

In terms of performance, the INI-9090U supports high-speed data transfer rates, enhancing the efficiency of data access and retrieval. With the ability to handle multiple devices simultaneously, the controller can manage complex workflows without sacrificing speed or reliability. This performance optimization is essential for applications that require rapid data processing and transfer, such as video editing, large-scale data analysis, and extensive database management.

The INI-9090U is also designed with advanced error correction technologies, ensuring that data integrity is maintained during transmission. This feature is particularly crucial in environments where data accuracy is paramount. The controller is equipped with the latest firmware updates, allowing it to adapt to various operating systems and providing users with a seamless plug-and-play experience. Compatibility with major operating systems, including Windows and Linux, further enhances its usability.

Another noteworthy characteristic of the INI-9090U is its energy efficiency. As businesses increasingly aim for sustainable technology solutions, the low power consumption of the INI-9090U makes it an attractive option. It not only reduces operating costs but also contributes to an overall decrease in the environmental footprint of data centers.

In summary, the Initio INI-9090U is a highly capable controller that combines flexibility, performance, and reliability in a single package. Its support for both IDE and SATA interfaces, high-speed data transfer, advanced error correction, and energy efficiency make it an ideal choice for businesses seeking to optimize their storage solutions while maintaining compatibility with legacy systems. As technology continues to evolve, controllers like the INI-9090U will remain integral to the seamless integration of old and new data storage solutions.
Top Page Image Contents