Initio INI-9090U manual Hardware Installation

Page 15

11

Hardware Installation

8Host computer configuration

Most computer manufacturers with a PCI bus automatically configure the add on- card or host adapter I/O Port address, IRQ Channel and BIOS address. If this is not the case with your computer system, you will need to manually configure your system.

There are two means of configuring the PCI bus from the host computer system:

1.Setting jumpers on the host system motherboard.

2.Setting CMOS BIOS incorporated into the host system.

You will need to refer to the host computer system documentation to complete PCI bus activation and setup.

If the host system will be using a SCSI device to provide system boot capability, then the system CMOS drive type settings may need to be changed. Under some conditions the system will expect the boot disk to be an IDE drive. This must be changed in order to boot from a SCSI device.

9System startup

The newly installed SCSI bus is now ready to power up. Switch on peripheral and host computer system power. The system monitor should display the following information, but may vary, based on the system BIOS manufacturer.

•The normal Power-On Self Test and memory test procedure.

•The host adapter sign on message including a list of attached SCSI devices.

The list should match the peripheral devices attached to the bus. In most cases the host computer system is now configured and ready for use.

Some situations will require that a low-level format be performed using the host adapter SmartSCSI Setup Utility to initialize a SCSI disk drive and lay the foundation for a bootable SCSI drive.

10 SmartSCSI Setup Utility

The SmartSCSI Setup Utility simplifies the SCSI installation process by eliminating the need for opening the system to change system jumpers and switch settings. All necessary host adapter functions are accessible through the utility, simplifying customization for your system needs. Initio’s SmartSCSI Setup Utility is divided into five segments identified by: Scan Bus; Device Setup; Adapter Setup; BIOS Setup; and Disk Utility. These program functions are accessible by typing <CTRL><I> at the boot-up prompt.

initio®

Page 14 Page 16
Image 15
Page 14 Page 16
Contents INI-9090U D140-01 June First Edition Contents Linux Driver Installation Initio INI-9090U HostAdapter IntroductionINI-9090U Board Layout Technical IllustrationProduct Features Product Features/SpecificationsProduct Specifications Scsi bus termination Getting StartedHostAdapter and the Scsi Bus Scsi bus preparationOFF Getting StartedOhighway Hardware InstallationInstallation Basics Installation inTen Easy StepsInserting the host adapter into a PCI slot Connecting the 50-pin internal flat ribbon cable External cable connection Hardware Installation Initio Host Adapter Setup Data can be Lost by Changing Settings Device SetupBios Setup Adapter SetupInitio MS-DOS/Windows 3.1x Driver Installation InstallationOverview MS-DOS/Windows 3.1x Driver Installation Aspi CD-ROM Driver Command Line Options Aspi Manager Command Line OptionsAutoexec.bat Sample CONFIG.SYS and AUTOEXEC.BAT FilesAspi Disk Driver Command Line Options Aspi Partition & Format Utility Sample CONFIG.SYSNew Windows 95/95a Installation Microsoft Windows 95/95b OSR2 Driver InstallationControl Panel Microsoft Windows 95/95b OSR2 Driver InstallationMicrosoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95/95a Device Driver New Windows 95B OSR2 Installation Microsoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95B OSR2 Device Driver Initio NewWindows NT Installation Microsoft Windows NT Driver InstallationRemove diskette in drive a and set it aside Control Panel Installing a newWindows NT system from a Bootable CD New IntraNetWare Installation Novell NetWare Driver InstallationNovell NetWare Driver Installation Adding the Initio driver to an existing IntraNetWare systemPCI.XXXX.XXXX.XXXX.XXXX.XX Upgrading/Changing Driver on an Existing IntraNetWare Server Driver Config Options Device driver command line optionsNew OS/2 installation IBM OS/2 Driver InstallationAdding the Initio driver to an existing OS/2 system Device driver command line options Initio SCO Unix Driver Installation Updating interrupts and hardware settings10Overview Installing the Initio driver in a new SCO Unix system Adding the Initio driver to an existing SCO Unix systemEnter Changing to the INI-9XXX as the bootable host adapter Initio SCO UnixWare Driver Installation Installing the Initio driver in a new UnixWare system11Overview Adding the Initio driver to an existing UnixWare system Removing the Initio driver from a UnixWare system Using Multiple Host AdaptersSCO UnixWare Driver Installation 12Overview Linux DriversInitio Troubleshooting MS-DOS, OS/2 &Windows NT DOS Space 1GBDrives with Multiple Operating Systems Initio Index Windows NT Workstation Setup OEMSETUP.INFSETUP.EXE SYSTEM.INI TXTSETUP.OEM Update DriverFCC Compliance Statement Product WarrantyEN 55 9100UW2 Declaration of Conformance Declaration of the Manufacturer/Importer

INI-9090U specifications

The Initio INI-9090U is a versatile and robust controller designed to cater to the ever-evolving demands of modern storage solutions. As a high-performance USB to IDE and SATA interface controller, it stands out for its ability to bridge older technologies with contemporary data transfer requirements. This integration is particularly significant in environments where legacy systems must interface seamlessly with newer data transfer protocols.

One of the main features of the INI-9090U is its support for both IDE and SATA interfaces. This dual compatibility ensures that users can connect a wide variety of storage devices, ranging from traditional hard drives to solid-state drives, facilitating easy upgrades and maintenance of storage systems. This flexibility is particularly beneficial for businesses that rely on diverse data storage solutions and need to maintain effective operational capabilities.

In terms of performance, the INI-9090U supports high-speed data transfer rates, enhancing the efficiency of data access and retrieval. With the ability to handle multiple devices simultaneously, the controller can manage complex workflows without sacrificing speed or reliability. This performance optimization is essential for applications that require rapid data processing and transfer, such as video editing, large-scale data analysis, and extensive database management.

The INI-9090U is also designed with advanced error correction technologies, ensuring that data integrity is maintained during transmission. This feature is particularly crucial in environments where data accuracy is paramount. The controller is equipped with the latest firmware updates, allowing it to adapt to various operating systems and providing users with a seamless plug-and-play experience. Compatibility with major operating systems, including Windows and Linux, further enhances its usability.

Another noteworthy characteristic of the INI-9090U is its energy efficiency. As businesses increasingly aim for sustainable technology solutions, the low power consumption of the INI-9090U makes it an attractive option. It not only reduces operating costs but also contributes to an overall decrease in the environmental footprint of data centers.

In summary, the Initio INI-9090U is a highly capable controller that combines flexibility, performance, and reliability in a single package. Its support for both IDE and SATA interfaces, high-speed data transfer, advanced error correction, and energy efficiency make it an ideal choice for businesses seeking to optimize their storage solutions while maintaining compatibility with legacy systems. As technology continues to evolve, controllers like the INI-9090U will remain integral to the seamless integration of old and new data storage solutions.
Top Page Image Contents