Iiyama B1706S user manual Fitting and Removal of Base ProLite E1706S

FITTING AND REMOVAL OF BASE : ProLite E1706S

CAUTION

Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before installation to avoid electric shock or damage.

ENGLISH

<Installation>

APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

BHold the monitor and push the Stand.

CHold the monitor and push the Stand-Base.

Stand

Stand-Base

<Remove>

APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

BPress the stopper at the bottom of the stand and remove the Stand-Base from the stand.

CPress the stopper at the back of the stand and remove the Stand from the monitor.

Stopper

Stand-Base

Stopper Stand

6 BEFORE YOU OPERATE THE MONITOR