ENGLISH
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1706S
For optimal viewing it is recommended to position
yourself directly opposite to the full face of the |
| |
monitor, then adjust the monitor’s height and |
| |
angle to your own preference. |
| |
Hold the panel so that the monitor does not |
| |
topple when you change the monitor’s height or |
| |
angle. | 110mm | |
You are able to adjust the monitor's height up to | ||
| ||
110mm, angle up to 170 degrees right and left, |
| |
20 degrees upward. |
|
NOTE Do not touch the LCD screen when you change the height or the angle. It may cause damage or break the LCD screen.
Careful attention is required not to catch your fingers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid finger contact with the displays
base when adjusting the height. | Monitor | ||
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stand
PANEL ROTATION : ProLite B1706S
AAdjust the mother’s height.
BRotate the panel 90 degrees. Portrait: Turn clockwise. Landscape: Turn counter clockwise.
NOTE Attempting to rotate without fully extending upward may cause damage to stand.
Video card for portrait display will be required for rotating the image on the screen.
CAdjust the monitor’s angle to your preference.
90° |
12 BEFORE YOU OPERATE THE MONITOR