Sennheiser SKM 500, EK 500 manual Indications and displays, LC display panel

Indications and displays

LC display panel

Alphanumeric display

“B.CH“ – appears when the channel bank and the channel number are displayed

“MHz“ – appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

“PILOT” display

(pilot tone transmission is activated)

“MUTE” display (audio input is muted)

7-step level display for audio signal “AF”

Operation and battery status indication

The red LED (LOW BAT/ON) provides information on the current operating state of the radiomicrophone:

Red LED lit up:	The	radiomicrophone is	switched
	on and the capacity of the
	batteries/BA 2015 accupack is
	sufficient.
Red LED flashing:	The	batteries are/the	BA 2015
	accupack is going flat (LOW BAT)!
In addition, the 4-step battery status display			on the

display panel provides information on the remaining battery/BA 2015 accupack capacity:

3 segments:	capacity approx. 100 %
2 segments:	capacity approx. 70 %
1 segment:	capacity approx. 30 %
Battery icon flashing:	LOW BAT

40