W220D
Multi Function Wide Monitor
Problem | Possible solution |
|
|
Color defects | Check that the signal cable connector is properly connected and that |
| the connection pins are not bent or damaged. Try another color |
| temperature. |
Size, position, | Adjust the picture characteristics as described in the section OSD |
shape or quality | |
unsatisfactory |
|
Duplicated | A problem with your graphics adapter or display unit. Contact your |
images | service representative. |
Image is not | Check that the display resolution and frequency from your PC or |
stable | graphic adapter is an available mode for your monitor. |
| In your PC, you can check through Control panel, Display, Settings. |
| If the setting is not correct, use your computer utility program to |
| change the display settings. |
Message : | Check that the signal cabel connector is properly connected and that |
No signal | the connection pins are not bent or damaged. |
| If the connector is loose, tighten the connector’s screws. |
| Check that the computer is switched on. |
The power LED is | To enter a power saving mode. You can reactivate the system by |
a orange color | pressing any key or moving the mouse. |