Hitachi Koki USA CMP4120HDUS user manual Handling the Remote Controller, Loading Batteries

ENGLISH

INSTALLATION INSTRUCTIONS (continued)

Handling the Remote Controller

Loading Batteries

1)Open the battery cover.

•Slide the battery cover towards the arrow mark while pressing it.

2)Load batteries.

• Load two Size AA batteries included observing the correct polarities.

3)Close the battery cover.

•Slide back the battery cover towards the arrow mark.

Handling the Remote Controller

•Use the remote controller within about 5 m from front of the unit’s remote-control sensor and within 30 degrees on both sides.

With in 30 degrees

With in 30

degrees About 5m

	•	Do not use new and old batteries together. The batteries could
	•	explode or leak, resulting in fires, physical injury, or stains.
CAUTIONS		When loading batteries, observe their correct polarities as marked on
		the product. If loaded in the wrong direction, the batteries could
		explode or leak, resulting in fires, physical injury, or stains.
	•	Do not drop or impact the remote controller.
	•	Do not splash the remote controller with water or put it on a wet
	•	object to avoid possible failures.
		Before leaving the remote controller out of use for an extended
TIPS	•	period of time, remove the batteries from it.
		If the remote controller begins to lack responsiveness, replace the
	•	batteries.
		Strong light such as direct sunlight impinging on the photoreceptor
		of the remote control can cause operational failure. Position this unit
		to avoid direct contact with such light.

8