Havis-Shields KK-K9-D22-K manual

Contour Window Guards

11. Mount window guards:

Note: window guards have holes around perimeter for permanent mounting. These holes are not used with hinge kit. They also come flat in shipping. The guard must be pre-bent (outward) so it fits the contour of the vehicles window frame. Do not use holes on side of window guard to mount with the hinge application!

•Hold window guard with pre-assembled hinge and upper bracket onto window frame.

•Make sure guard is centered on window.

•Hinge window down being sure to keep window guard centered and mark holes using window guard as template on 1” bent lip of door panel.

•Pre-drill and attach hinge to lip on door panel using #10 x ½” Stainless flat head sheet metal screws.

•Hinge window guard back to up position with upper mounting bracket attached and mark mounting holes.

•Pre-drill and attach upper mounting bracket to window frame using #10 x ½” Sheet metal screws.

•Re-attach window guard to bracket. This step may require some adjustment to align thumb screws to nut-certs on bracket.

Note: Product is painted black for Demo purposes only. Product is shipped unpainted

KK-K9-D22-K_INST_9-07