Havis-Shields KK-K9-D22-K Mount Aluminum Step sills, Front and Rear Mounting Brackets

5.Mount Aluminum Step sills

•Center floor inside vehicle.

•Front edge of floor will line up with front edge of step sill. Top of Step sill will mold to curve of trim.

•Pre-drill and attach using #10 x ½” Stainless sheet metal screws.

Step Sill

6.Front and Rear Mounting Brackets.

•Lower “B” pillar trim will need to be partially removed to allow for mounting to metal behind trim.

•Loosely attach 2-pcs front mounting brackets to front cage using ¼-20 x ¾” carriage bolts and serrated nuts.

•Mark and pre-drill where mounting bracket comes into contact with “B” pillar support.

•Attach to metal “B” pillar support using ¼” x ¾” Hex head lag bolts.

•Trim will have to be notch to accept bracket.

•Tighten all hardware on front and rear cage mounting brackets.

Front Cage Mounting Brackets

KK-K9-D22-K_INST_9-07