HANNspree SM198 manual Installation Instructions, User’s Manual, Remove, Removal, Power Source

Page 8

INSTALLATION INSTRUCTIONS

User’s Manual

INSTALLATION INSTRUCTIONS

INSTALL

REMOVE

Figure.1. Installing and Removing the Base

INSTALLATION:

1.Align the monitor with the opening in the base.

2.Note that the longer section of the base points forward.

3.Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly.

4.Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base.

REMOVAL:

1.Flip over the monitor so that it is upside down.

2.Press the 2 clips on the base that holds the monitor in place.

3.Gently press and hold the 2 clips while pulling the base from the monitor unit they are unattached.

POWER

POWER SOURCE:

1.Make sure that the power cord is the correct type required in your area.

2.This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3.Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to wall-outlet.

8

Image 8

Contents SM198 LCD Monitor OSDV4.38CANADA FCC Class B Radio Frequency Interference StatementUser’s Manual RECYCLING INFORMATION TABLE OF CONTENTS ERROR MESSAGE & POSSIBLE SOLUTIONSSAFETY NOTICE PRECAUTIONSSPECIAL NOTES ON LCD MONITORS Lamp DisposalFEATURES CHECKING THE CONTENTS OF THE PACKAGEBEFORE YOU OPERATE THE MONITOR The product package should include the following items LCD MonitorINSTALLATION INSTRUCTIONS POWERINSTALL INSTALLATIONWALL MOUNTING THE MONITOR SETTING THE MONITOR ON THE WALLDISSEMBLING THE STAND BASE MAKING CONNECTIONS CONNECTING TO A PCADJUSTING THE VIEWING ANGLE OPERATING INSTRUCTIONS GENERAL INSTRUCTIONSFRONT PANEL CONTROL Power ButtonPower Indicator AdjustResolution The screen resolutions available will depend on the purchased modelHOW TO ADJUST A SETTINGS INPUT SETTINGCOLOR SETTING IMAGE SETTINGINTERMEDIATE, and MAXIMUM. This feature is limited to OSD SETTINGavailability of this function depends upon the selected model onlyAdjusting the volume while muted cancels Mute mode SYSTEMAUDIO IN port. For HDMI Input only models with incorporated audioPLUG AND PLAY Plug & Play DDC2B Feature desktop and select PropertiesSettingsScreen TECHNICAL SUPPORT FAQQ & A FOR GENERAL PROBLEMS Addendum related to Windows ERROR MESSAGE & POSSIBLE SOLUTIONS FACTORY PRESET TIMING TABLERESOLUTION CABLE NOT CONNECTEDVideo mode SPECIFICATIONS APPENDIX